Hitachi Global Link Manager Software Messages

Message ID Message Text Cause Solution
KAIF20251-E Acquisition of
HP-UX
multipath
information
failed. (return
code = Return
code from
Agent
component)
An error occurred while
acquiring HP-UX multipath
information.
Make sure that HDLM
and Hitachi Command
Suite Common Agent
Component are
operating properly on
the host.
If the problem still
persists,To determine
the cause and resolve
the problem, detailed
investigation is
required.
Contact Support
Center, who may ask
you to collect
troubleshooting
information.
KAIF20252-E No valid paths
were found in
the host.
No valid paths exist in the
host.
Refresh the host
information.
KAIF20300-E An error
occurred while
configuring
HDLM. (IP
address = IP
address of the
host, return
code = Return
code from
Agent
component)
An error occurred while
configuring HDLM.
For Multihost Configuration, an
attempt was made to set the
value, which is not supported
by the HDLM version of the
host.
Make sure that HDLM
and Hitachi Command
Suite Common Agent
Component are
operating properly on
the host.
For Multihost
Configuration, re-set
the value, which is
supported by the
HDLM version of the
host, and re-execute
the operation.
If the problem still
persists, collect the
diagnostic information
and contact the
Support Center.
Please see the HDLM
manual if the HDLM
version is 5.8 or later
and if the return code
shows 1000-1999.
KAIF20301-E An
inconsistency
occurred while
configuring
HDLM. (IP
address = IP
address of the
host, return
code = Return
HDLM returns an error code
that means inconsistency.
Please update host
information and retry
again.
If the problem still
persists, collect the
diagnostic information
and contact the
Support Center.
Please see the HDLM
manual if the HDLM
Messages with IDs Beginning with KAIF
4-41
Hitachi Global Link Manager Messages