Hitachi Global Link Manager Software Messages

Message ID Message Text Cause Solution
HDLM agent.
The HDLM
manager is not
running. Check
whether the
HDLM manager
has started.
(return code =
Return code
from Agent
Component)
return code is
1000-1999, see the
HDLM manual. To
determine the cause
and resolve the
problem, detailed
investigation is
required. Collect
maintenance
information, and then
contact the customer
support center.
KAIF20386-E An error
occurred in
HDLM while
setting load
balancing for
LUs. (return
code = Return
code from
Agent
component)
A load balance algorithm not
supported by the storage
system was specified.
A load balance
algorithm that the
storage system
supports must be
specified.
Please see the HDLM
manual if the HDLM
version is 5.8 or later
and if the return code
shows 1000-1999.
KAIF20387-E An error
occurred while
setting load
balancing for
LUs. (return
code = Return
code from
Agent
component)
A load balancing algorithm not
supported by the storage
system was set.
A load balancing
algorithm not
supported by the
storage system cannot
be set.
Please see the HDLM
manual if the HDLM
version is 5.8 or later
and if the return code
shows 1000-1999.
KAIF20388-E An error
occurred in the
HDLM agent
while Dynamic
I/O Path
Control was
being set.
Check the
information of
the target host,
and then retry
the operation.
(return code =
Return code
from Agent
Component)
The storage system does not
support the Dynamic I/O Path
Control setting.
If the version of HDLM
is 7.3 or later and the
return code is
1000-1999, see the
HDLM manual.
KAIF20390-E An error
occurred while
setting the
alert. (IP
address = IP
address of the
An error was detected while
setting the alert.
Make sure that HDLM
and Hitachi Command
Suite Common Agent
Component are
operating properly on
the host.
4-50
Messages with IDs Beginning with KAIF
Hitachi Global Link Manager Messages