HP XP7 Audit Log User and Reference Guide (H6F56-96001)

+Command=Remote DKC Control
++S/N=XXXXX,SSID=0xBBBB,VOL(CU:LDEV)=0xAA:0xBB,APID=0,I/F=1
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionParameter
The command nameCommand
The serial number of the storage system for executing the commandS/N
No output if it is not specified at the command option
The SSID to which a volume for the storage system for executing the command belongsSSID
No output if it is not specified at the command option
The CU number and the LDEV number of the volume for executing the commandVOL(CU:LDEV)
No output if it is not specified at the command option
The application IDAPID
No output if it is not specified at the command option
The interface number between the application and the storage systemI/F
No output appears if it is not specified at the command option
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Resume Pair
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,In-band MF,uid=user-name,
,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Resume Pair
++Copy Type=Cnt Ac-J Z
++P-VOL(CU:LDEV)=0xAA:0xBB,S-VOL(CU:LDEV)=0xCC:0xDD,
MCU S/N=AAAAA,MCU SSID=0x3005,RCU S/N=BBBBB,RCU SSID=0x6500
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionParameter
The command nameCommand
The copy typeCopy Type
BC Z: Business Copy Z,
Cnt Ac-S Z: Continuous Access Synchronous Z,
Cnt Ac-J Z: Continuous Access Journal Z
The CU number and the LDEV number of the primary volumeP-VOL(CU:LDEV)
The CU number and the LDEV number of the secondary volumeS-VOL(CU:LDEV)
The serial number of the local storage systemMCU S/N
The SSID to which a volume for the local storage system belongsMCU SSID
The serial number of the remote storage systemRCU S/N
284 Audit log examples of commands sent from hosts, computers using RAID Manager, or hosts using Business Continuity Manager