HP XP7 Audit Log User and Reference Guide (H6F56-96001)

[Install] Set DevGrpDef
Example
08xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set DevGrpDef,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,DevGrpDef}=[{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=1
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the volume where the device group definition is
specified.
LDKC:CU:LDEV
Indicates whether the device group definition is enabled or disabled.UserAuth
Disable or Enable will appear.
The number of logical volumes where the device group definition is set.Num. of LDEVs
[Install] Set Fibre Address
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Fibre Address,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fibre Addr.}=[{XX,0xXX(xx)},{XX,0xXX(xx)}],Num. of Ports=2
Detailed Information
DescriptionItem
The name of the port that the fibre address has been setPort
The address of the Fibre Channel port after the setting is madeFibre Addr.
The information outside the parentheses indicates AL-PA (arbitrated-loop physical address).The
information inside the parentheses indicates the loop ID.
The number of ports where address has been setNum. of Ports
[Install] Set Fibre Topology
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Fibre Topology,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fabric,Connection}
=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},
{XX,Enable,P-to-P},{XX,Disable,P-to-P}],Num. of Ports=4
Detailed Information
DescriptionItem
The name of the port where the topology of Fibre Channel is setPort
Indicates whether the Fabric switch is enabled or disabledFabric
Enable: Enabled, Disable: Disabled
Install Descriptions 97