HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 44 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKZ40x) (continued)
Explanation and recommended actionsMessage textMessage ID
Generation ID (00-FF)
aa (decimal number)
Status of ATTIME suspension (0-4)
0: No ATTIME suspend time has
been set.
1: The ATTIME suspend time has
been set, but suspension has not
been performed yet.
2: Suspension was performed
because the ATTIME suspend time
expired.
3: Suspension was performed
because the timeout period
expired, or because the Cnt Ac-J
Z copy pair was in the suspend
status at the ATTIME suspend time.
4: Suspension was performed
because the system detected a
no-update journal.
ss (decimal number)
Status of ShadowImage (0-3)
0: The suspend processing has
not started.
1: The suspend processing is in
progress.
2: The suspend processing ended
successfully.
3: The suspend processing ended
abnormally.
uu (decimal number)
Status of Continuous Access
Journal(0 or 1)
0: All Continuous Access Journal
copy pairs were in the DUPLEX
status during the suspension.
1: During the suspension, there
was a Continuous Access Journal
copy pair whose status was not
DUPLEX.
eeee (hexadecimal number)
Error information on suspend
processing
0001: Suspension is not possible
because the ShadowImage copy
pair status is invalid.
0002: Suspension is not possible
because an error occurred due to
a problem in storage system.
ATTIME-suspend-time (GMT)
ATTIME suspend time:
YYYYMMDD-HH:MM:SS.NNNNNN
158 Messages