HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 48 Details of error codes 23xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputA BC copy pair cannot be made.
The reason might be one of the
following:
2331
• P-VOL is a Reserve volume.
• The volume size of P-VOL differs
from that of S-VOL.
• The shared memory capacity is
insufficient for copy pair
creation.
Not outputOutputA BC copy pair status cannot be
transitioned because the maximum
2332
multiplicity of the copy pairs for the
P-VOL was exceeded.
Not outputOutputA BC copy pair cannot be
suspended or dissolved because
2333
the copy pair is in the SIMPLEX
status.
Not outputOutputA BC copy pair cannot be made
because the emulation type of the
specified volume is not supported.
2334
Not outputOutputA BC copy pair cannot be made
because the RAID level or
2335
emulation type of the volume is not
supported.
Not outputOutputA BC copy pair status cannot be
changed because the combination
2336
of the drive emulation type of the
P-VOL and S-VOL is not
appropriate.
Not outputOutputA BC copy pair status cannot be
changed because the volume
2337
specified to be the P-VOL is already
the S-VOL.
Not outputOutputA BC copy pair cannot be
resynchronized because the copy
pair is in the SIMPLEX status.
233A
Not outputOutputA BC copy pair cannot be
resynchronized with Reverse
233F
specified because a CA or CAA
copy pair is not in the suspend
status.
Not outputOutputA BC copy pair status cannot be
changed because the volume
2343
specified to be the S-VOL is already
the S-VOL of a BC copy pair.
Not outputOutputA BC copy pair status cannot be
changed because the status of the
2344
copy pair does not allow the status
178 Storage system sense byte information