HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 54 Details of error codes 4Bxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
OutputNot
Output
OutputNot outputThe remote command cannot be
executed because the path
4B49
between the specified storage
system or CU (SSID) and the
command target storage system
is not set, or an error has
occurred on the path.
Not outputOutputNot
output
The CA copy pair that specified
a C/T group ID cannot be created
4B85
because the specified volume is
a FlashCopy pair.
Not outputOutputNot
output
A CA copy pair cannot be made
because the specified volume is
4B86
a FlashCopy pair and
differential-data management unit
is cylinder.
Not outputOutputNot outputA CAA copy pair cannot be
made because the specified CTID
4BA9
is not registered in the storage
system.
Not outputOutputNot
output
No timestamp transfer mode CA
copy pair can be made because
4BB1
the specified volume is not a CA
copy pair.
Not outputOutputNot
output
A timestamp transfer mode CA
copy pair cannot be made
4BB2
because the specified volume is
an XRC pair.
Not outputOutputNot
output
A CA copy pair resynchronization
that makes it possible to use the
4BD1
Open/MF Consistency
Preservation Function cannot be
performed because the specified
C/T group ID is invalid.
Not outputOutputNot
output
A CA copy pair cannot be made
and resynchronized because the
4BD2
specified volume does not support
the Open/MF Consistency
Preservation Function.
Not outputOutputNot outputThe specified operation cannot
be performed because either the
4BDE
local storage system or the remote
storage system does not support
inter-CU logical paths.
Not outputOutputNot
output
A CA copy pair cannot be made
because the necessary shared
4BE0
memory is not implemented in the
MCU.
200 Storage system sense byte information