HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 56 Details of error codes 7Fxx – 8Cxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
documented by error codes
C120 to C12F.)
Not outputOutputNot outputA CAJ copy pair cannot be made.
Possible reasons include one or
both of the following:
8C1E
• The micro version on the
specified primary storage
system does not support a
connection with the specified
secondary storage system.
• The specified primary storage
system does not support a
connection with the specified
secondary storage system.
OutputNot outputThe command could not be
executed because in the
8CE8
instruction to transfer to a remote
DKC, there is an error in the
parameter specification for the
host command.
OutputNot outputThe command could not be
executed because the path for the
8CE9
remote DKC control function is not
set.
Not outputOutputNot outputThe command could not be
executed because the path for the
8CEB
Remote DKC Control Function is
not set.
Not outputOutputNot outputThe command could not be
executed because in the
8CFB
instruction to transfer to a remote
storage system, there is an error
in the storage system serial
number.
Not outputOutputNot outputThe command could not be
executed because the command
device is not defined.
8CFC
Table 57 Details of error codes 8Dxx
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputA path cannot be established
because there is an invalid
parameter.
8D00
• The storage system serial
number is incorrect.
• The SSID is incorrect.
• The CU number is not
supported.
Not outputOutputNot outputA path cannot be established
because there is an invalid
8D01
208 Storage system sense byte information