HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 66 Details of error codes EBxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
specify a secondary storage
system that differs from the
secondarystorage system of
the existing copy pair.
Therefore, a CAJ copy pair
cannot be made.
This error occurs if there is
more than one secondary
storage system in the same
copy group or when the
specified journal group
number and mirror ID are
used for another copy group.
OutputNot outputThe batch pair status
command cannot be executed
EB3B
because the CU number
specified by the YKEWAIT
command or YKRSCAN
command is not supported by
this model.
Not outputOutputNot outputA CAJ copy pair status cannot
be changed because the
EB3C
specified serial number or
SSID of the primary storage
system does not match the
actual serial number or SSID
of the primary storage system.
Not outputOutputNot outputA CAJ copy pair status cannot
be changed because the
EB3D
specified serial number or
SSID of the secondary storage
system does not match the
actual serial number or SSID
of the secondary storage
system.
Not outputOutputNot outputA delta resync pair cannot be
made. The reason might be
one of the following:
EB48
• The P-VOL of a CA copy
pair and another P-VOL of
a CAJ copy pair do not
match.
• The storage system serial
number on the copy source
is incorrect.
Not outputOutputNot outputA delta resync pair cannot be
made because the delta
EB49
resync function is not
supported in the RCU.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the specified
R-JNL group is not registered.
EB4C
Not outputOutputNot outputA CAJ copy pair cannot be
made because the specified
EB4D
250 Storage system sense byte information