HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 66 Details of error codes EBxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputA delta resync pair cannot be
made because the S-VOL of
EBC6
the specified copy pair is
used by another program
product (BC/FlashCopy).
Not outputOutputNot outputA CAJ copy pair cannot be
resynchronized (with the
EBCE
DELTAJNL parameter)
because the specified S-VOL
has old differential
information. Execute the CAJ
copy pair resynchronization
(with the ALLJNL parameter).
OutputNot
output
OutputNot outputThe remote command cannot
be executed because the path
EBD0
between the specified storage
system or CU (SSID) and the
command target storage
system is not set, or because
an error has occurred on the
path.
OutputNot outputThe path for the remote
command transfer route for
EBD3
the second site onwards, or
for the command device,
might not be set, or a failure
occurred in the remote
command transfer route.
Make sure that the path and
the command device are set,
available, and have not
failed, and then re-execute the
operation.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the charging
EBD9
limit of CA in the RCU has
been exceeded. Check the
license capacity of this and
all related program products.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the charging
EBDA
limit of CAA in the RCU has
been exceeded. Check the
license capacity of this and
all related program products.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the charging
EBDB
limit of CAJ in the RCU has
been exceeded. Check the
license capacity of this and
all related program products.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the specified
EBE0
S-VOL is part of a delta resync
CAJ copy pair.
Details of error codes 255