HP XP7 Business Continuity Manager Reference Guide (TK954-96004)

Figure 58 Command Device Selection List Panel
Table 62 (page 103) describes the items in the Command Device Selection List panel.
Table 62 Contents of the Command Device Selection List Panel
DescriptionItem
DAD IDDevice Address Domain ID
Description of the storage system specified in the Host-Discovered Array
structure
Description
Storage system modelModel
• USP: HP XP12000/XP10000
• USPV: HP XP24000/XP20000 Disk Array
• VSP: HP XP P9500 Disk Array
• XP7: HP XP7 Storage
Microcode informationuCode
Interface versionIFType
Storage system serial numberS/N
Specify an action.AC
• q: Displays the Command Device Status panel used to display the
command device information, which is registered in the storage system.
• d: Deletes the command device information, which is registered in the
storage system. The Confirm Command Device Delete panel will be
displayed even if Confirm is set to off.
When multiple actions are specified in multiple AC columns, the actions
are executed in order from top to bottom.
Results of the action
1
Status
• Del,nn: Displays the result (RC) of deletion processing for the
command device, in nn format.
• Qry,nn: Displays the result (RC) of display processing for the command
device , in nn format.
SSID of the CU to which the detected command device belongs (2-digit
hexadecimal number)
SSID
Number of the CU to which the detected command device belongs (2-digit
hexadecimal number)
CU
Manage Route Panel (Route Management) 103