HP XP7 Business Continuity Manager Reference Guide (TK954-96004)

Table 62 Contents of the Command Device Selection List Panel (continued)
DescriptionItem
CCA of the detected command device (2-digit hexadecimal number)CCA
Device number of the detected command device (2-digit hexadecimal
number)
Devn
1
If the specified action has been aborted, the execution result (RC) is not displayed correctly.
When the route list definition has been modified or deleted, sometimes the command devices
defined in the old route list remain registered in the storage system. Such command devices can
be accessed directly through this panel.
NOTE: Only devices registered in the disk configuration definition file are displayed. Scan the
target storage system to detect command devices and register them in the disk configuration
definition file in advance.
Manage Path Set Panel (Logical Path Management)
When 5 Manage Path Set is selected in the Main Menu panel, the Manage Path Set panel to
operate path sets is displayed.
Figure 59 (page 104) shows the Manage Path Set panel.
Figure 59 Manage Path Set Panel
Pressing the F11=NextInfo key displays Description. Pressing the F10=PrevInfo key returns to the
previous display.
Figure 60 (page 104) shows the Manage Path Set panel displayed when the F11=NextInfo key is
pressed.
Figure 60 Manage Path Set Description Panel
Table 63 (page 105) describes the items in the Manage Path Set panel.
104 ISPF panels