HP XP7 Business Continuity Manager Reference Guide (TK954-96004)

1
See the table (for BC) in the HP XP7 for Business Continuity Manager User Guide for details about obtaining the status
of the displayed copy pair using the YKQRYDEV command. Note that when the device is a command device of either
of the following models, CDEV(apid) is displayed in the Status column (apid: APID):
• HP XP12000/XP10000 Disk Array
• HP XP24000/XP20000 Disk Array
• HP XP P9500 Disk Array
• HP XP7 Storage
2
If the emulation type of the journal volume is OPEN, JOURNAL is not displayed.
3
The timing for when the defined values are reflected is as shown inTable 49 (page 74) in the table item labeled When
effective.
4
It is displayed if P-VOL or S-VOL is shared with other copy pairs in the definition (for example, in a 1:n BC copy pair
configuration or when S-VOL for CAA is used as P-VOL for BC).
5
MISMATCH might be displayed. This happens when the device information during definition, as indicated by Primary
Volume and Secondary Volume, differs from the device information reported by the SSID. In this case, the device
information reported by the SSID is displayed in the Pair Volume column. If MISMATCH is displayed, check the configuration
file used and the actual storage system configuration information settings.
NOTE: N/A displays in the Device Information (DEVN) field in the following cases:
• When the YKQRYDEV command returns an error
• When displaying information about a device of a remote storage system if the route list has
not been loaded or the target storage system is not included in the route list
• When displaying information about a Non Gen'ed volume, and the route list has not been
loaded or the target storage system is not included in the route list.
Volume Query Information (CA) Panel
If you specify q in AC on the Copy Group Pair Status panel, the YKQRYDEV command is executed
on the P-VOL and S-VOL, and the Volume Query Information (CA) panel is displayed for a CA
copy pair.
The following figure shows the Volume Query Information (CA) panel.
Volume Query Information (CA)
Command ===> Scroll ===> PAGE
2012/03/23 16:30:24
Copy Group ID . . . . . . . . . : TC1
Copy Type(in Configuration): CA Copy Type(from Storage System) : CA
---------- Primary Volume ---------- --------- Secondary Volume ---------
SN SSID CU CCA DEVN Status Dir SN SSID CU CCA DEVN Status
10037 000A 07 0F 0002- PENDING (01) > 10007 000C 07 01 1301- PENDING (01)
C/T ID PROT MODE COPY PACE FENCE LVL Freeze SCP DIF UNIT CONSLOST(P-S)
0C PROTECT NORMAL NEVER Y CYL N-N
Other CopyPair Information
----- Primary/Secondary ----- ---- Pair Volume ----
Type C/T ID SN DEVN Status Dir SN SSID CU CCA DEVN
******************************* Bottom of data ********************************
F1=Help F3=Exit F4=Refresh F7=Backward F8=Forward
Table 76 (page 134) describes the items in the Volume Query Information (TC) panel.
Manage Copy Groups Panel (Copy Group Operation) 133