HP XP7 Business Continuity Manager Reference Guide (TK954-96004)

Set Defaults panel (prefix and DAD ID settings)
The Set Defaults panel is displayed when 1 Set Defaults is selected in the Main Menu panel. The
following items can be defined in the Set Defaults panel:
• The configuration file prefix and DAD ID.
• The maximum number of messages that can be output to the ISPF log.
• Whether to use the Remote DKC Control function, a route list ID, and a route label.
• The parameters for the YKWATCH command, which monitors volume status, and the JCL for
background jobs.
The following figure shows the Set Defaults panel (values in the figure are samples only).
Set Defaults
Command ===>
2008/03/19 21:21:24
Specify Default Settings
More: +
Configuration File Prefix . . . . BC
Local Device Address Domain ID . . DADP
ISPF Log Max . . . . . . . . . . . 0
Remote DKC Function . . . . . . . N
Preset RouteListID . . . . . . . .
Preset Route Label . . . . . . . .
Defaults and Options for Background Jobs
SEND Options . . . . . . SER(*)
Timeout Hours . . . . . 0
Timeout Minutes . . . . 30
Job Name Prefix . . . . YUKON18
JCL JOB Statement:
//JOBNAME JOB MSGCLASS=H,NOTIFY=YUKON18
//*
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel F17=DispConf
Table 11 (page 28) describes the items in the Set Defaults panel.
Table 11 Contents of the Set Defaults panel
DescriptionItem
Specify the prefix of the configuration file name in alphanumeric characters
(required).
Configuration File Prefix
1, 2, 3, 4
Do not use hyphens.
Specify the DAD ID of the local site in alphanumeric characters. (required)Local Device Address Domain ID
Do not use hyphens.
Specify the device address domain ID of the host on which Business Continuity
Manager is running (the host DAD ID) by using alphanumeric characters
(required).
ISPF Log Max
Hyphens cannot be specified.
Use the following values to set the Remote DKC Control Function:Remote DKC Function
5
• Y—Default to the Remote DKC Control Function.
• N—Do not default to the Remote DKC Control Function.
Specify ROUTE parameter value (the route list ID) for the YKLOAD command. Do
not use hyphens.
Preset RouteListID
5
If Remote DKC Function is set to Y, Preset RouteListID is not specified, and YKLOAD
is executed in the Manage Copy Groups panel, then the LOAD Option panel
to query the route list ID is shown.
28 ISPF panels