HP XP7 Business Continuity Manager User Guide (TK954-96005)

Table 106 Using a 3DC Multi-Target (Cnt Ac-J Z x Cnt Ac-J Z) configuration (continued)
See:DescriptionTargetMaintenance
or failure
direction of the other Continuous Access Journal Z
copy pair. Then, create a Continuous Access Journal
Z copy pair between both remote sites, and change
the configuration to a 3DC Multi-Target (Cnt Ac-J Z x
Cnt Ac-J Z) configuration in which operation is
performed from the failover-destination remote site.
--Operation in a 3DC Multi-Target (Cnt Ac-J Z x Cnt
Ac-J Z) configuration is not affected.
Host maintenance for remote
site 1 or remote site 2
“Operating procedure
during a primary site storage
Delete either Continuous Access Journal Z copy pair,
and then create a Continuous Access Journal Z copy
Primary site storage system
failure (with information lost
from memory)
Failure
system failure (withpair between remote sites 1 and 2, and then change
information lost from
memory” (page 386)
the configuration to a 2DC configuration (Remote 1
→ Remote 2, or Remote 2 → Remote 1). When
performing a failback, you must re-create the
“Operating procedure
during a primary site storage
Primary site storage system
failure (with no information
lost from memory)
Continuous Access Journal Z copy pair you have
deleted.
system failure (with no
information lost from
memory)” (page 391)
“Operating procedure
during a storage system
Migrate operation to remote site 2. To perform a
failback, perform a Reverse Resync operation on the
Storage system failure (with
information lost from
failure (with information lostContinuous Access Journal Z copy pair between thememory) at the primary site
and remote site 1 from memory) (volatile) atprimary site and remote site 2, and then re-create the
the primary site and remote
site 1” (page 391)
Continuous Access Journal Z copy pair between the
primary site and remote site 1.
“Operating procedure
during a storage system
Storage system failure (with
no information lost from
failure (with no informationmemory) at the primary site
and remote site 1 lost from memory) at the
primary site and remote site
1” (page 394)
“Operating procedure
during a storage system
After error recovery, delete and re-create the
Continuous Access Journal Z copy pairs between the
Storage system failure (with
information lost from
failure (with information lostprimary site and the remote site at which the failure
occurred.
memory) at remote site 1 or
2 from memory) at remote site
1 or 2” (page 395)
“Operating procedure
during a storage system
After error recovery, resynchronize the Continuous
Access Journal Z copy pairs between the primary site
and the remote site at which the failure occurred.
Storage system failure (with
no information lost from
memory) at remote site 1 or
2
failure (with no information
lost from memory) at remote
site 1 or 2” (page 396)
“Primary site host failure
(when operations can be
Delete either Continuous Access Journal Z copy pair,
and then reverse the copy direction of the remaining
Primary site host failure
(When operations can be
performed on bothContinuous Access Journal Z copy pair. Create aperformed on both
Continuous Access Journal
Z copy pairs)” (page 398)
Continuous Access Journal Z copy pair between both
remote sites, and then change the configuration to a
Continuous Access Journal
Z copy pairs)
3DC Multi-Target (Cnt Ac-J Z x Cnt Ac-J Z)
configuration in which operation is performed from
the failover-destination remote site.
“Primary site host failure
(when operations can be
Perform a Reverse Resync operation for the
Continuous Access Journal Z copy pair on which
operations can be performed.
Primary site host failure
(When operations can be
performed on only one of performed on only one of
the Continuous Access
Journal Z copy pairs)
the Continuous Access
Using a 3DC Multi-Target (Cnt Ac-J Z x Cnt Ac-J Z) configuration 373