HP XP7 Business Copy User Guide (TK913-96002)

DescriptionSSB2 code
The pair task was rejected because the volume you specified as the S-VOL for BC pair tasks is not an
S-VOL.
2344
The volume you specified as an BC S-VOL is a Cnt Ac-S P-VOL. The pair task was rejected because
the Cnt Ac-S pair is not in the required status.
2346
For more information about the required status for each pair task, see “Pair status and supported pair
user tasks” (page 65).
The volume you specified as an BC S-VOL was a Cnt Ac-S S-VOL. The pair task was rejected because
the Cnt Ac-S pair is not in the required status.
2347
For more information about the required status for each pair task, see “Pair status and supported pair
user tasks” (page 65).
The pair task was rejected because the volume you specified as the S-VOL is the volume of the Auto
LUN.
234B
The pair task was rejected because the specified P-VOL and the S-VOL for BC pair tasks is not a pair.2350
The pair task was rejected because the volume you specified as the P-VOL and the volume you specified
as the S-VOL are the same.
2351
The pair was not restored because the specified P-VOL and S-VOLs is online to the host.2352
The pair was not deleted because the specified P-VOL and S-VOLs are in the process of being Quick
Split.
2353
The pairresync RAID Manager command was rejected because the P-VOL and S-VOLs is in the
process of being Steady Split.
2354
The pair creation was rejected because the volume you specified as the S-VOL is the P-VOL of the pair
you are splitting or the P-VOL of the pair you are reverse resynchronizing.
2357
The pairresync RAID Manager command was rejected because the volume you specified as the
S-VOL is the P-VOL of the splitting pair.
2358
The volume you specified as a P-VOL is a Cnt Ac-S P-VOL. The reverse resynchronization was rejected
because the Cnt Ac-S pair is not suspended (“PSUE” status) or split (“PSUS” status).
235B
The volume you specified as the P-VOL is a Cnt Ac-S S-VOL. The reverse resynchronization was rejected
because the Cnt Ac-S pair is not suspended (“PSUE” status) or split (“PSUS” status).
235C
The volume you specified as an S-VOL was a Cnt Ac-S P-VOL. The reverse resynchronization was
rejected because the Cnt Ac-S pair is not suspended (“PSUE” status) or split (“PSUS” status).
235D
The reverse resynchronization was rejected because the volume you specified as the P-VOL has the
S-VOL Disable attribute assigned by the Data Retention.
236C
The pair task was rejected because the volume you specified as the S-VOL has the S-VOL Disable
attribute assigned by the Data Retention.
236D
The pair task was rejected because the volume you specified as the P-VOL is not mounted.2370
The pair task was rejected because the volume you specified as the P-VOL is blocked.2371
The pair task was rejected because the volume you specified as the P-VOL is being formatted or
shredded.
2372
The pair task was rejected because the volume you specified as the P-VOL is a command device.2373
The pair task was rejected because of one of the following reasons:2380
• The volume you specified as the S-VOL is not mounted.
• The MU number is 3 or larger.
The pair task was rejected because the volume you specified as the S-VOL is blocked.2381
The pair task was rejected because the volume you specified as the S-VOL is being formatted or
shredded.
2382
Locating and interpreting error codes and logs using the RAID Manager 81