HP XP7 External Storage for Open and Mainframe Systems User Guide (TK914-96001)

The external path is deleted from the Selected External Paths list.
6. Click Finish.
7. In the Confirm window, check settings, accept or enter a new task name, and then click Apply.
If you are replacing the path, see “Adding an external path to an existing path group ” (page 50).
Related Topics
• “Edit External Path Configuration wizard” (page 122)
Replacing all external paths
You can replace the primary and alternate paths used by an external volume. Doing this requires
one path to remain in Normal status at all times, which is shown in the following figure.
54 Monitoring and maintenance