HP XP7 External Storage for Open and Mainframe Systems User Guide (TK914-96001)

Parameter SettingsParametersWindow Names
ONCommand Queuing ModeInquiry Setting
HITACHI (default)Vendor ID
DF600F (default)Product ID
OptionalROM Microprogram Version
OptionalRAM Microprogram Version
OptionalWEB Title
Reset/LIP ModePort Type
OptionalReset/LIP Mode (Signal)
Optional.Reset/LIP Mode (Process)
OptionalLIP Reset Mode
OptionalRS232C Error Information Outflow
Mode
Controller Option
ONWrite and verify mode
Standard ModeHost Connection Mode 1Host Connection Mode
HISUP Mode (do not specify any other parameter).Host Connection Mode 2
Identifying the 9500 V model using the serial number
You can identify the storage system model from the serial number displayed in the Vendor / Model
/ Serial Number column in the External Storage System tab.
The following table shows the relationship between the number in the Serial Number column and
the storage system model.
ModelDisplayed Serial Number
9570V, 9520VD600XXXX
9530VD60JXXXX
9580V, 9585VD60HXXXX
Note: In serial numbers, "X" is an arbitrary number or character.
Identifying the controller using the port WWN
You can identify the controller (controller 0 or controller 1) from the WWN of the port.
The following table describes the relationship between the port WWN and the controller.
WWN of PortControllerModel
XXXXXXXXXXXXXXX0Controller 09570V
XXXXXXXXXXXXXXX19530V
9520V
XXXXXXXXXXXXXXX2Controller 1
XXXXXXXXXXXXXXX3
XXXXXXXXXXXXXXX0Controller 09580V
XXXXXXXXXXXXXXX19585V
XXXXXXXXXXXXXXX2
XXXXXXXXXXXXXXX3
82 Supported external storage systems