HP XP7 External Storage for Open and Mainframe Systems User Guide (TK914-96001)

Identifying the HUS/AMS/WMS model using the serial number
When the external storage system is HUS, AMS, or WMS, you can identify the storage system
model from the serial number displayed in the Serial Number column in the Volume Operation
window.
The following table describes the relationship between the number in the Serial Number column
and the storage system model.
ModelDisplayed Serial NumberStorage System
HUS 15095XXXXXHUS
HUS 13093XXXXX
HUS 11091XXXXX
AMS 250087XXXXXXAMS
AMS 230085XXXXXX
AMS 2100, AMS 201083XXXXXX
AMS 100077XXXXXX
AMS 50075XXXXXX
AMS 20073XXXXXX
WMS 10071XXXXXXWMS
In serial numbers, "X" is an arbitrary number or character.
When the model of HUS/AMS/WMS storage system is changed, the Serial Number is changed
as well. If the HUS/AMS/WMS storage system is used as an external storage system, the mapped
external volume may be blocked. To correct this problem, you can delete the mapping of the
external volume and remap it to use the blocked external volume. See “Requirements for external
storage system maintenance” (page 65) for detailed information on remapping.
Identifying the controller using the port WWN (HUS/AMS/WMS)
When the external storage system is HUS, AMS, or WMS, you can identify the controller (controller
0 or controller 1) from the port WWN.
The following table describes the relationship between the port WWN and the controller.
WWN of PortControllerModel
XXXXXXXXXXXXXXX0Controller 0AMS 200
WMS 100
XXXXXXXXXXXXXXX1Controller 1
XXXXXXXXXXXXXXX0Controller 0AMS 2100
XXXXXXXXXXXXXXX1AMS 2010
AMS 500
XXXXXXXXXXXXXXX2Controller 1
XXXXXXXXXXXXXXX3
XXXXXXXXXXXXXXX0Controller 0HUS 110
XXXXXXXXXXXXXXX1HUS 130
XXXXXXXXXXXXXXX2AMS 2300
XXXXXXXXXXXXXXX3AMS 1000
XXXXXXXXXXXXXXX4Controller 1
XXXXXXXXXXXXXXX5
84 Supported external storage systems