HP XP7 Fast Snap User Guide (TK913-96003)

Cause of errorRAID Manager commandSSB2
The command ended abnormally because you specified a volume as the FS
P-VOL and that volume has an emulation type other than OPEN-V.
paircreate, pairsplit,
pairresync, pairresync
-restore
9729
You cannot create the FS pair because the volume you specified as the FS P-VOL
has the command device setting.
paircreate972A
You cannot create the FS pair because the capacity of the volume you specified
as the FS P-VOL exceeds the supported size.
paircreate972C
Note: The supported size is 4 TB.
You cannot create the FS pair because the capacity of the volume you specified
as the FS S-VOL exceeds the supported size.
paircreate972E
Note: The supported size is 4 TB.
You cannot create the FS pair because you specified a V-VOL as the FS P-VOL.paircreate972F
You cannot create the FS pair because you specified a pool-VOL as the FS P-VOL.paircreate9730
You cannot restore the FS pair because the FS P-VOL and Cnt Ac-S P-VOL share
the volume, and the Cnt Ac-S pair is not split (“PSUS” status) or suspended and
blocked (“PSUE” status).
pairresync -restore9731
You cannot restore the FS pair because the FS P-VOL and Cnt Ac-J P-VOL share
the volume, and the Cnt Ac-J pair is not split (“PSUS” status) or suspended and
blocked (“PSUE” status).
pairresync -restore9732
You cannot restore the FS pair because the FS P-VOL and Cnt Ac-S S-VOL share
the volume.
pairresync -restore9733
You cannot restore the FS pair because the FS P-VOL and Cnt Ac-J S-VOL share
the volume.
pairresync -restore9734
You cannot create the FS pair because you specified Cnt Ac-J's journal volume
as the FS P-VOL.
paircreate9735
The command ended abnormally because the LDEV number of the volume you
specified as the FS S-VOL is beyond the specified range.
All commands973B
The command ended abnormally because you specified an unmounted volume
as the FS S-VOL.
All commands973C
The command ended abnormally because you specified a blocked volume as
the FS S-VOL.
paircreate, pairsplit,
pairresync, pairresync
-restore
973D
The command ended abnormally because you specified a volume that is in
process of being shredded or formatted as the FS S-VOL.
paircreate, pairsplit,
pairresync, pairresync
-restore
973E
The command ended abnormally because you specified a volume whose
emulation type is other than OPEN-V as the FS S-VOL.
paircreate, pairsplit,
pairresync, pairresync
-restore
973F
You cannot create the FS pair because the volume you specified as the FS S-VOL
has the command device setting.
paircreate9740
You cannot create the FS pair because you specified an external volume as the
FS S-VOL.
paircreate9742
You cannot create the FS pair because you specified a volume other than V-VOLs
as the FS S-VOL.
paircreate9745
You cannot create the FS pair because you specified a pool-VOL as the FS S-VOL.paircreate9746
You cannot create the FS pair because you specified a Cnt Ac-S P-VOL as the
FS S-VOL.
paircreate9747
Troubleshooting with RAID Manager 151