HP XP7 Fast Snap User Guide (TK913-96003)

Cause of errorRAID Manager commandSSB2
You cannot create the FS pair because you specified Cnt Ac-S S-VOL as the FS
S-VOL.
paircreate9748
You cannot create the FS pair because you specified an Cnt Ac-J data volume
or journal volume in the intermediate site of 3DC cascading configuration as
the FS S-VOL, the pair cannot be created.
paircreate9749
You cannot create the FS pair because you specified an Cnt Ac-J P-VOL as the
FS S-VOL.
paircreate974A
You cannot create the FS pair because you specified an Cnt Ac-J S-VOL as the
FS S-VOL.
paircreate974B
You cannot create the FS pair because you specified an Cnt Ac-J journal volume
as the FS S-VOL.
paircreate974C
The command ended abnormally because the volume you specified as the FS
S-VOL has an S-VOL Disable attribute.
All commands974F
The command ended abnormally because the Max LBA size of the volumes you
specified as the FS P-VOL and S-VOL is different.
paircreate, pairsplit,
pairresync, pairresync
-restore
9752
The command ended abnormally because the number of slots of the volumes
you specified as the FS P-VOL and S-VOL is different.
paircreate, pairsplit,
pairresync, pairresync
-restore
9753
You cannot create the FS pair because you specified an THP V-VOL as the FS
S-VOL.
paircreate9754
The command ended abnormally because you specified an Auto LUN V2 source
volume as the FS P-VOL.
All commands9757
For more information about using Auto LUN V2, contact HP Technical Support.
The command ended abnormally because you specified an Auto LUN V2 target
volume as the FS P-VOL.
All commands9758
For more information about using Auto LUN V2, contact HP Technical Support.
The command ended abnormally because you specified a BC P-VOL as the FS
S-VOL.
All commands975A
The command ended abnormally because you specified a BC S-VOL as the FS
S-VOL.
All commands975B
The command ended abnormally because you specified an Auto LUN V2 source
volume as the FS S-VOL.
All commands975D
For more information about using Auto LUN V2, contact HP Technical Support.
The command ended abnormally because you specified an Auto LUN V2 target
volume as the FS S-VOL.
All commands975E
For more information about using Auto LUN V2, contact HP Technical Support.
An unavailable parameter (unsupported parameter) is specified in the command.paircreate976A
You cannot store the snapshot data because you have run the command when
the pair is suspended and blocked (“PSUE” status).
pairsplit976C
The snapshot data cannot be stored because the FS P-VOL and Cnt Ac-S S-VOL
share the volume, and the status of the Cnt Ac-S pair is COPY.
pairsplit976E
Snapshot data cannot be stored because the FS P-VOL and Cnt Ac-J S-VOL share
the volume, and the status of the Cnt Ac-J pair is “COPY”.
pairsplit976F
The FS pair cannot be created because you specified Cnt Ac-J delta resync pair
volume as the FS S-VOL.
paircreate9772
152 RAID Manager command reference