HP XP7 RAID Manager Installation and Configuration User Guide (T1610-96065)
Table Of Contents
- XP7 RAID Manager Installation and Configuration User Guide
- Contents
- 1 Installation requirements
- System requirements
- Supported environments
- Supported Business Copy environments
- Supported Continuous Access Synchronous environments
- Supported Continuous Access Asynchronous environments
- Supported Continuous Access Journal environments
- Supported Snapshot environments
- Supported Data Retention environments
- Supported Database Validator environments
- Supported guest OS for VM
- Supported IPv4, IPv6 platforms
- Requirements and restrictions for z/Linux
- Requirements and restrictions for VM
- Porting notice for OpenVMS
- Using RAID Manager with Hitachi and other storage systems
- 2 Installing and configuring RAID Manager
- 3 Upgrading RAID Manager
- 4 Removing RAID Manager
- 5 Troubleshooting
- 6 Support and other resources
- A Fibre-to-SCSI address conversion
- B Sample configuration definition files
- Glossary
- Index
Table 18 Mirror Descriptors and Group Assignments
Cnt Ac-J
Only
Business Copy
(Snapshot) Only
MU#0HORCM_DEV Parameter in Configuration File
MU#1-#3MU#1-#2BCCnt Ac-S/
Cnt Ac-J
(MU#3-#63)
--oradev1oradev1HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
Oradb oradev1 CL1-D 2 1
-oradev11oradev1oradev1HORCM_DEV
oradev21#dev_group dev_name port# TargetID LU# MU#
Oradb oradev1 CL1-D 2 1
Oradb1 oradev11 CL1-D 2 1 1
Oradb2 oradev21 CL1-D 2 1 2
-oradev21oradev11oradev1HORCM_DEV
oradev31#dev_group dev_name port# TargetID LU# MU#
Oradb oradev1 CL1-D 2 1
Oradb1 oradev11 CL1-D 2 1 0
Oradb2 oradev21 CL1-D 2 1 1
Oradb3 oradev31 CL1-D 2 1 2
--oradev1-HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
Oradb oradev1 CL1-D 2 1 0
-oradev11oradev1-HORCM_DEV
oradev21#dev_group dev_name port# TargetID LU# MU#
Oradb oradev1 CL1-D 2 1 0
Oradb1 oradev1 CL1-D 2 1 1
Oradb2 oradev21 CL1-D 2 1 2
oradev21-oradev11oradev1HORCM_DEV
#dev_group dev_name port# TargetID LU# MU# oradev31
Oradb oradev1 CL1-D 2 1 oradev41
Oradb1 oradev11 CL1-D 2 1 0
Oradb2 oradev21 CL1-D 2 1 h1
Oradb3 oradev31 CL1-D 2 1 h2
Oradb4 oradev41 CL1-D 2 1 h3
Cascade function and configuration files
Each volume in a cascading connection is described by an entry in the configuration definition
file on the each HORCM instance, and each connection of the volume is specified by mirror
descriptor. In the case of a Business Copy/Continuous Access Synchronous cascading connection,
too, the volume is described in the configuration definition file on the same instance. The following
topics present examples of Business Copy and Business Copy/ Continuous Access Synchronous
cascading configurations.
Business Copy
The following figure shows an example of a Business Copy cascade configuration and the associated
entries in the configuration definition files. Business Copy is a mirror configuration within one
storage system, so the volumes are described in the configuration definition file for each HORCM
instance: volumes T3L0, T3L4, and T3L6 in HORCMINST0, and volume T3L2 in HORCMINST1.
Examples of RAID Manager configurations 89