HP XP7 RAID Manager Reference Guide (T1610-96064)

/dev/rdsk/c23t0d2 ORA ORA_002 CL2-J 0 2 0 61456 194
/dev/rdsk/c23t0d3 ORA ORA_003 CL2-J 0 3 0 61456 195
/dev/rdsk/c23t0d4 ORA ORA_004 CL2-J 0 4 0 61456 256
/dev/rdsk/c23t0d5 ORA ORA_005 CL2-J 0 5 0 61456 257
/dev/rdsk/c23t0d6 ORA ORA_006 CL2-J 0 6 0 61456 258
/dev/rdsk/c23t0d7 - - - - - 0 61456 259
HORCM Shutdown inst 9 !!!
Please check '/tmp/test/horcm9.conf','/tmp/test/log9/curlog/
horcm_*.log', and modify 'ip_address & service'.
# ls <=Verify configuration and log files.
horcm9.conf log9
# vi *.conf <=Verify config file, check ip address & service.
# Created by mkconf.sh on Mon Jan 22 17:59:11 JST 2001
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
127.0.0.1 52323 1000 3000
HORCM_CMD
#dev_name dev_name dev_name
#UnitID 0 (Serial# 61456)
/dev/rdsk/c23t3d0
Example 2: mkconf command tool (HP-XP shown
HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
# /dev/rdsk/c23t0d0 SER = 61456 LDEV = 192 [FIBRE FCTBL = 4] ORA
ORA_000 CL2-J 0 0 0
# /dev/rdsk/c23t0d1 SER = 61456 LDEV = 193 [FIBRE FCTBL = 4] ORA
ORA_001 CL2-J 0 1 0
# /dev/rdsk/c23t0d2 SER = 61456 LDEV = 194 [FIBRE FCTBL = 4] ORA
ORA_002 CL2-J 0 2 0
# /dev/rdsk/c23t0d3 SER = 61456 LDEV = 195 [FIBRE FCTBL = 4] ORA
ORA_003 CL2-J 0 3 0
# /dev/rdsk/c23t0d4 SER = 61456 LDEV = 256 [FIBRE FCTBL = 4] ORA
ORA_004 CL2-J 0 4 0
# /dev/rdsk/c23t0d5 SER = 61456 LDEV = 257 [FIBRE FCTBL = 4] ORA
ORA_005 CL2-J 0 5 0
# /dev/rdsk/c23t0d6 SER = 61456 LDEV = 258 [FIBRE FCTBL = 4] ORA
ORA_006 CL2-J 0 6 0
# ERROR [CMDDEV] /dev/rdsk/c23t0d7 SER = 61456 LDEV = 259
[OPEN-3-CM] <=See Notes.
HORCM_INST
#dev_group ip_address service
ORA 127.0.0.1 52323 <=Check and update as needed.
Notes on mkconf:
• A unitID is added to the Serial# order. If two or more command devices exist in the storage
system, select the device file that is shared among the storage system ports on a priority basis,
and treat as an alternate command device. For XP7, the number of which 300,000 is added
to the serial number is displayed.
• If the STDIN device includes the command device, the target device is excepted as a comment
as shown below:# ERROR [CMDDEV] /dev/rdsk/c23t0d7 SER = 61456 LDEV =
259 [ OPEN-3-CM ]
• If the STDIN device is shared among multiple device files and already displayed as a target
device, the target device is excepted as a comment as shown below:# ERROR [LDEV LINK]
/dev/rdsk/c24t0d3 SER = 61456 LDEV = 195 [FIBREFCTBL = 4]
126 Command tools