HP XP7 RAID Manager Reference Guide (T1610-96064)

HMD: Displays the following HOST MODE for the host adapter setting on host group.
• HP-XP, SOLARIS, AIX, WIN, LINUX/IRIX, TRU64, DYNIX, OVMS, NETWARE, HI-UX
• VMWARE, HP-XP, VMWARE_EX, WIN_EX, Ext Stor
HMO_BITs: Displays the host mode options of the host group. For details, see the section Creating
host groups and registering hosts in host groups (in a Fibre Channel environment) in the HP XP7
Provisioning for Open Systems User Guide.
raidcom modify host_grp
Sets a host mode to the host group on the specified port.
To set a host mode option, specify the "-host_mode_opt" option.
To reset a host mode option, specify the "-host_mode_opt 100" .
If the specified host group does not exist, the command is ignored.
Syntax
raidcom modify host_grp -port <port#> [<host group name>]
-host_mode < host mode> [-host_mode_opt <host mode option> … ]
Options and parameters
DescriptionOption
Specifies the port number, host group ID, and host group name. If the host group name is
more than 64 characters, use the host group ID. For example:
-port <port#>[<host group
name>]
• CL1-A-g (g is from 0 to 254)
• CL1-A Linux_X86
Specifies the host mode using the following strings. For details, see the HP XP7 Provisioning
for Open Systems User Guide.
-host_mode <host mode>
• LINUX/IRIX
• VMWARE
• HP-XP
• OVMS
• TRU64
• SOLARIS
• NETWARE
• WIN
• AIX
• VMWARE_EX
• WIN_EX
• Ext Stor
Host mode option[ -host_mode_opt <host
mode option>… ]
This parameter is used when setting the option bits for the host mode option. For details,
see the section Creating host groups and registering hosts in host groups (in a Fibre Channel
environment) in the HP XP7 Provisioning for Open Systems User Guide.
Byte [n] MSB-------Bit------LSB
Byte [0] 00 01 02 03 04 05 06 07
Byte [1] 08 09 10 11 12 13 14 15
:
:
Byte [11] 88 89 90 91 92 93 94 95
152 Configuration setting commands