HP XP7 RAID Manager Reference Guide (T1610-96064)

The following characters are not supported by both RAID Manager and Remote Web Console. To

ensure that names are usable in both RAID Manager and Remote Web Console, do not use these

characters in names.

• ! (exclamation mark)

• ' (quotation mark)

• # (number sign)

• $ (dollar sign)

• % (percent sign)

• & (ampersand)

• ' (apostrophe)

• ( (left parenthesis)

• ) (right parenthesis)

• + (plus sign)

• · (middle dot)

• { (left curly bracket)

• } (right curly bracket)

• | (vertical line)

• ~ (tilde)

• : (colon)

• = (equals sign)

NOTE: You can use:

• the backslash character (\) only on WIN32.

• the forward slash character (/) only on UNIX series.

• a hyphen for the name, but cannot use at the beginning of the name. You can neither use

some character codes according to the OS on which you execute the command.

• a space (SP) in the name, but the delimiter of the field of the name including a space cannot

be judged when you execute the reference command.

• a space in between the characters. However, if you use a space at the beginning or the ending

of the name, the space is omitted automatically. And also, you cannot use the name using

only the space. The sample for using a space in the name is as follows.

The example for the name that you can use the space (SP)

"group name"

The example for the name that you cannot use the space (SP)

" name"

"name "

" "

20 Overview of commands