HP XP7 RAID Manager Reference Guide (T1610-96064)

Examples
Displaying a resource group and resource group lock information.
# raidcom get resource
RS_GROUP RGID stat Lock_owner Lock_host Serial#
meta_resource 0 Unlocked - - 64556
Description of each column in output example.
RS_GROUP: Resource group name.
RGID: resource group ID. RGID=0 is used for meta resource group.
stat: locking status of the resource group name.
Lock_owner: owner (authorized user) who locks the resource group name.
Lock_host: host name of a user who locks the resource group name.
Serial#: Product serial number.
For XP7 Storage, the number of which 300,000 is added to the serial number is displayed.
raidcom lock resource
This locks the specified resource group name.
When you perform these commands, lock the resource group to which resource is allocated before
executing the command.
• add
• delete
• modify
• initialize
• check_ext_storage
• disconnect
• set
• reset
• reallocate
• monitor
If the specified resource group name does not exist, this command is rejected with EX_ENOOBJ.
In authentication mode, the user executing this command must have a permission for the resource
group name.
Syntax
raidcom lock resource [-resource_name <resource group name>]
[-time <time(sec)>]
Options and parameters
DescriptionOption
Specifies the name of resource group (maximum 32 characters).[-resource_name <resource
group name>]
Specify defined resource group names.
If this parameter is not specified, all resource groups that are assigned to the user are
locked.
This parameter is used for specifying the latency until the specified resource is locked.[-time <time(sec)> ]
The TOV time of the lock instruction is specified.
202 Configuration setting commands