HP XP7 RAID Manager Reference Guide (T1610-96064)

DescriptionOption
When <time> is specified as "0", it is executed as "nowait (no waiting time)" mode.
If this parameter is not specified, the default waiting time (7200 seconds) is used.
Examples
Resource group: Locking the resource of the meta_resource.
# raidcom lock resource -resource_name meta_resource
raidcom unlock resource
This unlocks the specified resource group name.
If the specified resource group name does not exist, this command is rejected with EX_ENOOBJ.
In authentication mode, A user executing this command must have a permission for the resource
group name.
Syntax
raidcom unlock resource [-resource_name <resource group name>]
Options and parameters
DescriptionOption
Specifies the name of resource group (maximum 32 characters).[-resource_name
<resource group name>]
Specify defined resource group names.
If this parameter is not specified, all resource groups that are assigned to the user are
unlocked.
Examples
Resource group: Unlocking the resource of the meta_resource.
# raidcom unlock resource -resource_name meta_resource
raidcom add snap_pool
Creates Pools/Adds pool VOLs for Fast Snap or Snapshot by the specified LDEVs. A device group
can also be specified instead of an LDEV.
When specifying a pool that is already created for Fast Snap or Snapshot, the specified LDEV is
added as a pool volume.
Specify either one of Pool ID or Pool Name certainly. If both the Pool ID and Pool Name options
are omitted, this command is rejected with EX_REQARG.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.
If you create multiple pools with specifying only the pool names, execute the raidcom get
command_status command to each pool and confirm each completion.
Syntax
raidcom add snap_pool {{-pool_id <pool ID#> [-pool_name <pool
naming>] | -pool_name <pool naming>[-pool_id <pool ID#>]}
| -pool_id <pool ID#> -pool_name <pool naming>}}
{-ldev_id <ldev#> …[-cnt<count>] | -grp_opt <group option>
-device_grp_name <device group name> [<device name>]}
[-user_threshold <%> ][-thinsnap]
raidcom unlock resource 203