HP XP7 RAID Manager Reference Guide (T1610-96064)

DescriptionOption
pairresync is performed as Non quick mode regardless of setting of $HORCC_RSYN environment
variable and/or the system option mode 87 via SVP.
mode = quick
pairresync is performed as Quick Resync regardless of setting of $HORCC_RSYN environment
variable and/or the system option mode 87 via SVP.
If this option will not be specified, then performing pairresync is dependent on $HORCC_RSYN
environment variable and/or the system option mode setting through the SVP whether the
pairresync operation is Quick Split or not.
The relationship between '-fq' option and $HORCC_RSYN is as shown below.
_____________________________________________________
-fq option $HORCC_RSYN Behavior
--------------------------------------------------
quick Don't care Quick resync
normal Don't care Normal resync
Unspecified QUICK Quick resync
Unspecified NORMAL Normal resync
Unspecified Unspecified Dependent on mode 87
In the case of Restore (-restore is specified):-fq <mode>
mode = normal(In the case of
Restore (-restore is
specified))
The pairresync -restore command is performed as Non quick mode regardless of the setting of
the $HORCC_REST environment variable and/or the system option mode 80 via SVP.
mode = quick
The pairresync -restore command is performed as Quick Restore regardless of the setting of the
$HORCC_REST environment variable and/or the system option mode 80 via SVP.
If this option is not specified, then the performing of the pairresync has being depended on
$HORCC_REST environment variable and/or the system option mode setting through the SVP
whether the pairresync operation is Quick Restore or not.
The relationship between '-fq' option and $HORCC_REST are shown as below.
_____________________________________________________
-fq option $HORCC_REST Behavior
----------------------------------------------------
quick Don't care Quick restore
normal Don't care Normal restore
Unspecified QUICK Quick restore
Unspecified NORMAL Normal restore
Unspecified Unspecified Dependent on Mode 80
Notes:-fq <mode>
(Notes)
• This -fq option also is validated on Continuous Access Synchronous-Continuous Access
Synchronous/Business Copy cascading operation using '-F BC [MU#]' option.
• The -fq option is applied for XP12000 Disk Array/XP10000 Disk Array, and later. This option
is ignored for XP1024/XP128 Disk Array, in order to maintain the compatibility on
XP1024/XP128 Disk Array, so that you can use the same script adding this option.
• If this option is combined with '-restore' option in P9500, during the maintenance work in
the storage system (SVP is in modify mode), this operation cannot be completed.
Continuous Access Synchronous Async and Continuous Access Journal only.-cto <o-time> [c-time]
[r-time]
These options are valid for only Continuous Access Synchronous Async/Continuous Access
Journal, if you will specify -cto <o-time> [c-time] [r-time] option on Continuous Access Synchronous
sync, then it is ignored.
o-time:This option is used when setting offloading timer for controlling Inflow of Write I/O to
the specified CT group. For Continuous Access Synchronous Async, o-time can be set from 1
40 Data management commands