HP XP7 RAID Manager Reference Guide (T1610-96064)

DescriptionOption
Searches whether the specified raw_device is included in a group on the configuration definition
file (local instance). If it is in the group, the target volume is executed as the paired logical volume
-d[g] <raw_device>
[MU#]
(-d) or group (-dg). This option is effective without specification of -g <group> option. If the
specified raw_device is contained in two or more groups, the command is executed for the first
group.
Forcibly specifies a cascading remote copy volume for specified pair logical volumes on local
copy environment. If the -l option is specified, this option tests status of a cascading remote copy
-FHORC [MU#] or
-FCA [MU#]
volume on a local host (near site). If no -l option is specified, this option tests status of a cascading
remote copy volume on a remote host (far site). The target remote copy volume must be P-VOL
or SMPL.
Forcibly specifies a cascading local copy volume for specified pair logical volumes on remote
copy environment. If the -l option is specified, this option tests status of a cascading local copy
-FMRCF [MU#] or
-FBC [MU#]
volume on a local host (near site). If no -l option is specified, this option tests status of a cascading
local copy volume on a remote host (far site). The target local copy volume must be a P-VOL or
SMPL.
Searches whether the specified LDEV is included in a group on the configuration definition file
(local instance). If it is in the group, the target volume is executed as the paired logical volume
-d[g] <seq#>
<LDEV#> [MU#]
(-d) or group (-dg). This option is effective without specification of '-g <group>' option. If the
specified LDEV is contained in two or more groups, the command is executed on the first group.
The <seq #> <LDEV #> values can be specified in hexadecimal (add the '0x' prefix) or decimal
notation. For XP7, specify the number of which 300,000 is added to the serial number for <seq#>.
Specifies the waiting status, which is 'smpl', 'copy(including 'RCPY')', 'pair', 'psus', or 'psue'. If
two or more statuses are specified following -s, waiting is done according to the logical OR of
the specified statuses. This option is valid when the -nowait option is not specified.
-s <status>
Specifies the waiting status, which is 'smpl', 'copy'('RCPY' is included), 'pair', 'ssus','psue' on
SVOL. If two or more statuses are specified following -ss, waiting is done according to the logical
OR of the specified statuses. This option is valid when the -nowait option is not specified.
-ss <status>
Specifies the interval of monitoring a status specified using the -s and -ss option and the time-out
period in units of 1 sec. Unless [interval] is specified, the default value (3 seconds) is used. This
-t <timeout>
[interval]
option is valid when the -nowait option is not specified. If <timeout> is specified more than
1999999, then WARNING message appears.
If you execute the command in the Out-of-Band method, specify 3 seconds (default value) or more
to <timeout>.
When this option is specified, the pair status at that time is reported without waiting. The pair
status is set as a returned value for this command. When this option is specified, the -t and -s
options are not needed.
-nowait
When this option is specified, the pairing status on SVOL at that time is reported without waiting.
The pairing status is set as a returned value for this command. When this option is specified, the
-t and -ss options are not needed.
-nowaits
When this command cannot utilize a remote host for host down, this option executes this command
by a local host only. The target volume of a local host must be SMPL or P-VOL. (Business
Copy/Snapshot volumes are able to specify from SVOL.)
-l
Suppresses messages to be displayed when this command is executed. It is used to execute a
command from a user program. This option must be specified at the beginning of a command
argument. The command execution log is not affected by this option.
-nomsg
Returned values
The pairevtwait command sets the following returned values during exit allowing you to check the
execution results.
pairevtwait 45