HP XP7 RAID Manager Reference Guide (T1610-96064)

Syntax
paircurchk { -h | -q | -z | -I[H][M][instance#] or
I[TC][SI][instance#]
| -g <group> | -d <pair Vol> | -d[g] <raw_device> [MU#]
| -d[g] <seq#> <LDEV#> [MU#] | -nomsg }
Options and parameters
DescriptionOption
Displays Help/Usage and version information.-h
Terminates the interactive mode and exits the command.-q
Makes the paircurchk command enter the interactive mode. The -zx option guards performing
of the HORCM in the interactive mode. When this option detects a HORCM shut down, interactive
mode terminates.
-z or -zx
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business
Copy], and used when specifying the RAID Manager instance number.
-I[H][M] [instance#]
or
-I[TC][SI] [instance#]
Specifies a group name defined in the configuration definition file. The command is executed
for the specified group unless the -d <pair Vol> option is specified.
-g <group>
Specifies paired logical volume name defined in the configuration definition file. When this
option is specified, the command is executed for the specified paired logical volume.
-d <pair Vol>
Searches whether the specified raw_device is included in a group on the configuration definition
file (local instance). If it is in the group, the target volume is executed as the paired logical
-d[g] <raw_device>
[MU#]
volume (-d) or group (-dg). This option is effective without specification of -g <group> option. If
the specified raw_device is contained in two or more groups, the command is executed for the
first group.
Searches whether the specified LDEV is included in a group on the configuration definition file
(local instance). If it is in the group, the target volume is executed as the paired logical volume
-d[g] <seq#>
<LDEV#> [MU#]
(-d) or group (-dg). This option is effective without specification of '-g <group>' option. If the
specified LDEV is contained in two or more groups, the command is executed on the first group.
The <seq #> <LDEV #> values can be specified in hexadecimal (add the '0x' prefix) or decimal
notation. For XP7, specify the number of which 300,000 is added to the serial number for
<seq#>.
Suppresses messages to be displayed when this command is executed. This option must be
specified at the beginning of a command argument. The command execution log is not affected
by this option.
-nomsg:
Returned values
The paircurchk command sets the following returned values during exit allowing you to check the
execution results.
Normal termination (data is consistent): 0
Abnormal termination: other than 0, refer to the error codes for error details.
Error codes
The following table lists and describes the error codes for the paircurchk command. Unrecoverable
errors are fixed and is not resolved, even after re-executing the command. If the command fails,
the detailed status is logged in the RAID Manager command log ($HORCC_LOG), even if the user
script has no error handling.
paircurchk (for Continuous Access Synchronous) 65