HP XP7 RAID Manager Reference Guide (T1610-96064)

DescriptionOption
• PORT: Displays the port number (port#) defined in the configuration definition file.
• TARG: Displays the targetID (TargetID) defined in the configuration definition file.
• LUN: Displays the LUN (LU#) defined in the configuration definition file.
• M: Displays the MUN (MU#) defined in the configuration definition file. MU# for Continuous
Access Synchronous are shown as '-', and MU# for Business Copy/Snapshot are shown as
'0', '1', '2'.
• SERIAL: Displays the production (serial#) number of the RAID storage system.
For XP7, the number of which 300,000 is added to the serial number is displayed.
• LDEV: Displays the LDEV# within the RAID storage system.
Displays the relation between Group on the configuration definition file and Device_File registered
to the LDEV map tables, based on the Device File name (raw device file provided via STDIN).
-find verify [MU#]
This option can be used with '-fx' and '-fd' options. This option is affected by the command
execution environment (HORCC_MRCF).
# ioscan -fun | grep rdsk | raidscan -find verify
DEVICE_FILE Group PairVol PORT TARG LUN M SERIAL LDEV
/dev/rdsk/c0t3d0 oradb oradev1 CL1-D 3 0 0 35013 17
/dev/rdsk/c0t3d1 oradb oradev2 CL1-D 3 1 0 35013 18
/dev/rdsk/c0t3d2 - - - - - 0 35013 19
# ioscan -fun | grep rdsk | raidscan -find verify 1 -fd
DEVICE_FILE Group PairVol Device_File M SERIAL LDEV
/dev/rdsk/c0t3d0 oradb oradev1 c0t3d0 1 35013 17
/dev/rdsk/c0t3d1 oradb oradev2 Unknown 1 35013 18
/dev/rdsk/c0t3d2 - - - 1 35013 19
Note: If the device name is different between DEVICE_FILE and Device_File, then it shows shared
LDEV among multiple device files.
• Group: Displays the group name (dev_group) defined in the configuration definition file.
• PairVol: Displays the paired volume name (dev_name) within the group defined in the
configuration definition file.
• PORT: Displays the port number (port#) defined in the configuration definition file.
• TARG: Displays the targetID (TargetID) defined in the configuration definition file.
• LUN: Displays the LUN (LU#) defined in the configuration definition file.
• M: Displays the MUN (MU#) defined in the configuration definition file. MU# for Continuous
Access Synchronous are shown as '-', and MU# for Business Copy/Snapshot are shown as
'0', '1', '2'.
• Device_File: Displays Device_File which is registered to the LDEV map tables into the RAID
Manager.
• SERIAL: Displays the production (serial#) number of the RAID storage system.
For XP7, the number of which 300,000 is added to the serial number is displayed.
• LDEV: Displays the LDEV# within the RAID storage system.
Displays the Port, target ID, LUN in horcm.conf image by using a special file (raw device file)
provided via STDIN. If target ID & LUN are Unknown for the target device file, you must start
-find[g] conf [MU#]
[-g <group>]
RAID Manager without any description for HORCM_DEV and HORCM_INST, and should be
described the shown the Port, targetID, LUN for HORCM_DEV. This option can be used with
the '-fx' option.
[-g <group>] specifies the group for 'dev_group' on horcm.conf. If omitted, the group applies
'VG' as default.
The -findg option is used when displaying a LUN on the host view by finding a host group. For
XP7, the number of which 300,000 is added to the serial number is displayed for SER.
# cat /etc/horcmperm.conf | raidscan -find conf 0 -g ORA
HORCM_DEV
raidscan 71