HP XP7 Remote Web Console Messages (H6F56-96010)

Table 44 Error codes (part code 04005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf the same problem persists despite retrying,
please call HP Technical Support.
An error occurred during SVP
processing.
05554204005
ECheck the setting(s).An LDEV number that does not apply to
the selected CU group has been
specified.
05557604005
EIf the problem persists despite retrying, please
contact HP Technical Support.
The resources of other SLPR(s) cannot be
accessed.
05652604005
EVerify the cache residency setting. To use the
prestaging function, set the prestaging area by
using Cache Residency.
The prestaging is not performed because
there is no prestaging area.
05654204005
EWait for a while, then retry the operation.The current Cache Residency setting
cannot be changed because the sidefile
size exceeds the threshold.
05851104005
EWait for a while, then retry the operation.The current Cache Residency setting
cannot be changed because the
prestaging operation is in progress.
05851204005
EWait for a while, refresh the window, and then
retry the prestaging operation, or verify that the
Prestaging not completed.05851304005
storage system is not blocked. If this problem
persists, contact HP Technical Support.
EIf the problem persists despite retrying, please
contact HP Technical Support.
Currently running microcode version
does not support the specified operation.
05851404005
EWait for a while, then retry the operation.The specified operation cannot be
performed because one of the following
maintenance operations is in progress:
05870904005
• LDEV formatting
• Correction Copy
• Drive Copy
• Changing CHA/DKA status
• Changing the cache status
• Replacing an OEM drive microcode
• LDEV shredding or extent shredding
WSpecify volumes other than those in the online
data migration process.
Some of the specified volumes are in the
online data migration process.
07504104005
Part code 04010
Table 45 Error codes (part code 04010)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
iCorrect the specified content, and issue the
request again.
Part of the range is already in use.00103004010
iCorrect the specified content, and issue the
request again.
The specified value is outside the valid
range.
00103204010
EIf the problem persists despite retrying, please
contact HP Technical Support.
Prestaging not completed.00208004010
122 Message (part code group 04nnn)