HP XP7 Remote Web Console Messages (H6F56-96010)

Table 50 Error codes (part code 05205) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSelect the volumes with the same size for the
migration source and target, and then retry the
operation.
The sizes of the source and the target
volumes are not equal.
00867105205
EIf this problem persists, contact HP Technical
Support.
An error occurred during SVP
processing.
00897105205
WSelect a different volume, and then retry the
operation.
The specified volumes cannot be used
for migration, because the specified
05505905205
source volume is a Continuous Access
Synchronous volume, or a Continuous
Access Synchronous Z volume, and the
specified target volume is an external
volume.
WConfirm the settings of the specified volumes.The specified volume migration plan
cannot be performed because a volume
05506005205
on which VMA for Data Retention is set
is paired with a volume on which VMA
is not set.
ECheck the setting of the migration source volume
and the migration target volume.
If the migration source volume is a
normal volume, a CVS volume of the
05520105205
same capacity as the migration source
volume cannot be specified as the
migration target volume. If the migration
source volume is a CVS volume, a
normal volume of the same capacity as
the migration source volume cannot be
specified as the migration target volume.
ESpecify the parameters other.The auto migration plans cannot be
created because "None" is specified in
"Sampling Term".
05520705205
WSelect a volume that has the same owner ID.The owner ID of the storage system used
by the user does not match the owner
ID of the specified target volume.
05522305205
WThe specified plan cannot be released with
Remote Web Console.
The specified plan is the one created by
other than Remote Web Console.
05522505205
WThe specified migration plan cannot be stopped
with Remote Web Console.
The specified plan is the one created by
other than Remote Web Console.
05522605205
WSelect a different volume, and then retry the
operation.
The volume(s) are already being used
as a data volume by Continuous Access
Journal or Continuous Access Journal Z.
05525805205
WSelect a different volume, and then retry the
operation.
The volume(s) are already being used
as a data volume by Continuous Access
Journal or Continuous Access Journal Z.
05525905205
WSelect a different volume, and then retry the
operation.
The specified volumes are already being
used by Compatible FlashCopy
orCompatible FlashCopy SE.
05543105205
WSelect a different volume, and then retry the
operation.
The specified volumes are already being
used by Compatible FlashCopy
orCompatible FlashCopy SE.
05543205205
EIf this problem persists, contact HP Technical
Support.
An error occurred during SVP
processing.
05550005205
WSelect a different volume, and then retry the
operation.
The specified volumes are already
usedas the volumes of Fast Snap.
05552105205
134 Message (part code group 05nnn)