HP XP7 Remote Web Console Messages (H6F56-96010)

Table 56 Error codes (part code 06005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSpecify another volume.A pair cannot be created because the
specified primary volume is being used
as a pool volume.
05849806005
WSpecify another volume.A pair cannot be created because the
specified secondary volume is being
used as a pool volume.
05849906005
WWait a while, then retry the operation.A communication time-out error occurred
between the local storage system and
the remote storage system.
05850906005
WVerify that the shredding is complete, and then
retry the operation.
A pair cannot be created because the
specified primary volume is being
shredded by Data Retention.
05856806005
WVerify that the shredding is complete, and then
retry the operation.
A pair cannot be created because the
specified secondary volume is being
shredded by Data Retention.
05856906005
WVerify whether the specified volume number is
correct or the usage status of the host for the
specified secondary volume.
The operation cannot be performed
because the specified volume cannot be
used as a secondary volume due to a
host setting.
05858606005
WVerify whether the microcode version of the
remote storage system supports the 4x4x4
The pair cannot be created with a time
stamp set because the remote storage
05864006005
cascade function. If the version does not supportsystem does not support the 4x4x4
cascade function. the 4x4x4 cascade function, update the
microcode of the remote storage system to the
version that supports the function, or create a pair
with the setting that does not transfer a time
stamp.
WVerify the licensed capacity of Continuous Access
Synchronous or Continuous Access Synchronous
Z.
The licensed capacity of Continuous
Access Synchronous or Continuous
Access Synchronous Z on the remote
storage system is insufficient.
05871206005
WVerify the licensed capacity of Continuous Access
Synchronous or Continuous Access Synchronous
Z.
The licensed capacity of Continuous
Access Synchronous or Continuous
Access Synchronous Z on the local
storage system is not enough.
05871406005
WWait until the configuration change performed
by RAID Manager or Auto LUN and so on is
complete, and then retry the operation.
The operation cannot be performed
because a configuration change is in
progress in the local storage system.
06574006005
WVerify the primary volume setting, and then retry
the operation.
The operation cannot be performed
because the specified primary volume is
06801106005
being used as a Thin Provisioning
volume.
WVerify the setting of the specified secondary
volume, and then retry the operation.
The operation cannot be performed
because the specified secondary volume
06801206005
is being used as a Thin Provisioning
volume.
WConfirm that no pairs are in COPY or Pending
status, then retry the operation.
The setting of Maximum Initial Copy
Activities (CU) cannot be changed to
06802006005
Enable or Disable, because there are
pairs in the COPY or Pending status.
WInstall the Cont Access Journal 3DC & 4x4 Open
MF function on the local storage system.
The specified primary volume is used as
a pair volume of Continuous Access
06802206005
162 Message (part code group 06nnn)