HP XP7 Remote Web Console Messages (H6F56-96010)

Table 58 Error codes (part code 06505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WDelete the LUN paths on the specified port, and
then retry the operation.
LUN paths are defined on the specified
port.
00889106505
EVerify the SSB log, and then contact HP Technical
Support.
An internal error occurred.00889306505
WStop the jobs from the host, and then retry the
operation.
Jobs exist on the specified port.00889406505
WStop the jobs from the host, and then retry the
operation.
Jobs exist on the port of the remote
storage system.
00889506505
WRefresh the window, and then retry the operation.
If this problem persists, contact HP Technical
Support.
A parameter error occurred.00889606505
WDelete the LUN paths defined on the port, and
then retry the operation.
LUs exist on the port.00889706505
WRetry the operation.Pending data exists on the port.00889806505
EVerify the SSB log, and then contact HP Technical
Support.
An internal error occurred.00889906505
EIf this problem persists, contact HP Technical
Support.
An error occurred during the port
change.
00890006505
EIf this problem persists, contact HP Technical
Support.
An error occurred during the port
change.
00890106505
EIf this problem persists, contact HP Technical
Support.
An error occurred during the port
change.
00890206505
EIf this problem persists, contact HP Technical
Support.
Unknown Error Code.00890306505
WVerify the status of the port, and then retry the
operation.
Remote Web Console attempted to
change the port type. However, this
00891506505
attempt could not be made because the
same operation was in progress from a
host.
WDelete the LUN paths on the specified port, and
then retry the operation.
LUN paths are defined to the port on the
remote storage system.
00892406505
WVerify the port type of the specified port, and then
retry the operation.
Invalid port type.00892906505
WDelete the LUN paths on the specified port, and
then retry the operation.
LUN paths are defined to the port on the
remote storage system.
00893006505
WDelete the LUN paths on the specified port, and
then retry the operation.
LUN paths are defined to the port on the
remote storage system.
00893106505
WVerify the configuration of the volume specified
as the secondary volume.
The Create Pairs operation cannot be
performed because the volume specified
00893406505
as the secondary volume is a NAS
system volume.
WVerify the microcode version of the remote storage
system.
The Create Pairs operation cannot be
performed. The microcode version of the
00893606505
specified remote storage system does
not support the remote replication
function using NAS volumes.
Part code 06505 173