HP XP7 Remote Web Console Messages (H6F56-96010)

Table 58 Error codes (part code 06505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSpecify the LDEV ID that is supported by the
remote storage system, and then retry the
operation.
The remote storage system does not
support the LDEV ID of the specified
primary volume.
06801906505
WCheck the connected storage system's microcode
version.
The operation failed because the current
microcode version does not support
Delta Resync.
06802406505
WInstall the program product license of Cont Access
Journal 3DC & 4x4 Open MF on the local storage
system.
The volume specified as the primary
volume is used as a pair volume of
Continuous Access Synchronous or
06802506505
Continuous Access Synchronous Z. The
operation cannot be performed because
the program product license of Cont
Access Journal 3DC & 4x4 Open MF is
not installed on the local storage system.
WInstall the program product license of Cont Access
Journal 3DC & 4x4 Open MF on the remote
storage system.
The volume specified as the secondary
volume is used as a pair volume of
Continuous Access Synchronous or
06802606505
Continuous Access Synchronous Z. The
operation cannot be performed because
the program product license of Cont
Access Journal 3DC & 4x4 Open MF is
not installed on the remote storage
system.
WConfirm the LDKC number of the specified
extended consistency group.
Journals cannot be added to the
extended consistency group (EXCTG),
06802806505
because the current microcode version
does not support LDKC numbers other
than 0.
WVerify that the LDEV ID or LUN ID, and the mirror
ID of the specified volume are correct.
The status of the specified volume is
Simplex or SMPL.
06875906505
WSelect a different volume or release the setting of
a system disk for the secondary volume, and then
retry the operation.
The Create Pairs operation cannot be
performed because the volume specified
as the secondary volume is a system
disk.
06877906505
WThe specified master journal runs in the 2DC
configuration in which Continuous Access
The specified operation cannot be
performed because LU is specified for
the error level.
06878106505
Synchronous is combined. Specify Mirror for the
error level.
WThe specified master journal runs in the 2DC
configuration in which Continuous Access
The Create Pair operation cannot be
performed because (0) is specified for
the mirror ID.
06878206505
Synchronous is combined. Specify other than (0)
for the mirror ID, and then retry the operation.
WThe specified master journal runs in the 2DC
configuration in which Continuous Access
The Create Pairs operation cannot be
performed because the specified primary
06878306505
Synchronous is combined. Delete the Continuousvolume is used by Continuous Access
Synchronous. Access Synchronous pair, and then retry the
operation, or specify the volume that is not used
by Continuous Access Synchronous.
WThe master journal of the specified primary volume
runs in the 2DC configuration in which Continuous
The Resync Pairs operation cannot be
performed because the status of the
06878406505
Access Synchronous is combined. Delete or
194 Message (part code group 06nnn)