HP XP7 Remote Web Console Messages (H6F56-96010)

Table 58 Error codes (part code 06505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
suspend the Continuous Access Synchronous pair
.
specified primary volume is either of the
following.
• The volume is not used by Continuous
Access Synchronous.
• The volume is used by Continuous
Access Synchronous, but the pair
status is not PSUS or PSUE.
WVerify the status of the specified primary volume
from the host or the SVP.
The operation cannot be performed
because the specified primary volume is
06880406505
used as a FICON(R) Data Migration
volume.
WVerify the status of the specified secondary volume
from the host or the SVP.
The operation cannot be performed
because the specified secondary volume
06880506505
is used as a volume of FICON(R) Data
Migration or Data Migration.
WSpecify a volume that is not used by FICON(R)
Data Migration.
The specified volume cannot be used as
a journal volume because it is used by
FICON(R) Data Migration.
06881106505
WCheck the volume capacity after the capacity
change of the volume ends, and then plan again
a combination of volumes to form a pair.
A pair cannot be created because the
volume specified as the secondary
volume is a Thin Provisioning or Thin
06881206505
Provisioning Z volume whose capacity
is being changed.
WCheck the volume capacity after the capacity
change of the volume ends, and then plan again
a combination of volumes to form a pair.
A pair cannot be created because the
volume specified as the primary volume
is a Thin Provisioning or Thin
06881306505
Provisioning Z volume whose capacity
is being changed.
WThe specified volume is being used in the 2DC
configuration in which Continuous Access
The pair cannot be released because
the specified volume is used as the pair
06881506505
Synchronous is combined. Delete the Continuousvolume of Continuous Access
Synchronous. Access Synchronous pair, and then retry the
operation.
WWait until the zero page reclamation on the
specified volume is complete, and then retry the
operation.
The operation cannot be performed
because the volume specified as the
secondary volume is a volume of Thin
06884206505
Provisioning or Thin Provisioning Z in
zero page reclaiming.
WWait until the zero page reclamation on the
specified volume is complete, and then retry the
operation.
The operation cannot be performed
because the volume specified as the
primary volume is a volume of Thin
06884306505
Provisioning or Thin Provisioning Z in
zero page reclaiming.
EWait until the initializing processing is complete,
and then retry the operation.
The operation failed, because the
specified primary data volume was
being initialized by
06884806505
Business Copy or ShadowImage for
Mainframe.
WWait until the initializing processing is complete,
and then retry the operation.
The operation cannot be performed
because the pool associated with the
06884906505
volume of Thin Provisioning or Thin
Provisioning Z that is specified as the
secondary volume is being initialized.
Part code 06505 195