HP XP7 Remote Web Console Messages (H6F56-96010)

Table 58 Error codes (part code 06505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WVerify the status of the specified secondary
volume, the virtual serial number, or the virtual
controller ID.
The Create Pairs operation cannot be
performed because the volume specified
as the secondary volume applies to any
of the following:
20853606505
• The volume already registered in the
selected mirror is an LDEV on which
the virtualization management is
disabled, but the specified volume is
one on which it is enabled.
• The volume already registered in the
selected mirror is an LDEV on which
the virtualization management is
enabled, but the specified volume is
one on which it is disabled.
• The virtual serial number or the virtual
controller ID of the specified LDEV,
on which the virtualization
management is enabled, is not valid.
WVerify the status of the specified primary volume,
the virtual serial number, or the virtual controller
ID.
The Create Pairs operation cannot be
performed because the volume specified
as the primary volume applies to any of
the following:
20853706505
• The volume already registered in the
selected journal group is an LDEV on
which the virtualization management
is disabled, but the specified volume
is one on which it is enabled.
• The volume already registered in the
selected journal group is an LDEV on
which the virtualization management
is enabled, but the specified volume
is one on which it is disabled.
• The virtual serial number or the virtual
controller ID of the specified LDEV,
on which the virtualization
management is enabled, is not valid.
WSpecify a volume other than the external volume
mapped for the online data migration, and then
The Create Pairs operation cannot be
performed because the cache mode of
20853806505
retry the operation. Or specify an external volumethe external volume that is mapped for
mapped for the online data migration, whoseonline data migration and is specified
as the primary volume is set to Through. cache mode is other than Through, and then retry
the operation.
WSpecify a volume other than the external volume
mapped for the online data migration, and then
The Create Pairs operation cannot be
performed because the volume specified
20853906505
retry the operation. Or delete the Auto LUN pair,
and then retry the operation.
as the primary volume is used as an
external volume that is mapped for the
online data migration, and is also used
as the pair volume of Auto LUN.
Part code 06505 203