HP XP7 Remote Web Console Messages (H6F56-96010)

Table 62 Error codes (part code 07005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the specified volume number.Because the boot device is the S-VOL in
the Pairsplit-S (Delete Pairs) command,
the flag does not match.
00864907005
WCheck the target volume number.The boot device and the P-VOL do not
match in the Paircreate (Create Pairs),
00865007005
Pairresync (Resync Pairs), or Pairsplit-S
(Delete Pairs) command.
WVerify the settings, and then retry the operation.The SSID is invalid.00865107005
WCheck the target volume number.The boot device is not a P-VOL nor
S-VOL.
00865207005
WCheck the target volume number.Because the boot device is the P-VOL in
the Pairsplit-S (Delete Pairs) command,
the flag does not match.
00865307005
WCheck the target volume number.Boot device and S-VOL do not match in
Paircreate (Create Pairs), Pairresync
00865407005
(Resync Pairs), or Pairsplit-S (Delete Pairs)
instruction.
WVerify the settings, and then retry the operation.An invalid secondary SSID is specified
for the Paircreate (Create Pairs) or
Pairresync (Resync Pairs) command.
00865507005
WVerify the settings, and then retry the operation.The secondary SSID specified for the
Pairsplit-S(Delete Pairs) or Pairsplit(Split
Pairs) command is invalid.
00865607005
EPlease contact HP Technical Support.The Swap&Freeze option cannot be
specified, because the mode 80 is on.
00865707005
WCorrect the MU number, and then retry the
operation.
The specified MU number is not less than
or equal to 2.
00869507005
WWait until the L1 pair is in the PSUS status, and
then perform operations on the L2 pair.
Operations cannot be performed on the
L2 pair because the L1 pair is not in the
PSUS status.
00892007005
WYou cannot create a pair with these volumes.If
you want to create a pair, you must use the
volumes to both of which VMA is set or not.
The command was rejected because you
tried to create a pair using a volume
with VMA setting by Data Retention and
a volume without VMA setting.
05526407005
WIncrease the licensed capacity of Open Systems
Array Management, and then retry the operation.
You cannot create the pair because the
licensed capacity of Open System Array
Management is insufficient.
05530107005
WUse the Reverse Resync option.Quick Restore cannot be performed
because the specified pair is composed
05564507005
of the external volumes with different
cache mode settings.
WWait for a while, and then click [Refresh].The storage system is in internal process,
or some other user is changing the
configuration.
05630107005
EIf this problem persists, contact HP Technical
Support.
An error occurred during SVP
processing.
05630207005
EIf this problem persists, contact HP Technical
Support.
An error occurred during SVP
processing.
05630307005
214 Message (part code group 07nnn)