HP XP7 Remote Web Console Messages (H6F56-96010)

Table 62 Error codes (part code 07005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
ECheck if the DKCMAIN and SVP microcode
versions are mismatched.
This function is not supported.05857307005
EIf this problem persists, contact HP Technical
Support.
An error occurred while connecting to
the storage system.
05857407005
EIf this problem persists, contact HP Technical
Support.
An error occurred while connecting to
the storage system.
05857507005
EIf the problem persists despite retrying, please
contact HP Technical Support.
A communication time-out error occurred
in the storage system.
05857607005
WVerify that the shredding is complete in the Data
Retention window, and then retry the operation.
The operation could not be performed
because the specified volume is being
shredded by Data Retention.
05857907005
WThe specified command cannot be executed with
the current pair composition. See the section
The command has been rejected,
because the specified S-VOL is used as
05858207005
about the interoperability with other products andP-VOL of Fast Snap or the specified MU
number is already used. functions and the Business Copy described in the
Snapshot User Guide for the condition of sharing
the volumes between Snapshot and Business
Copy.
WTo continue the operation, release the Fast Snap
setting.
The operation failed because the volume
was shared by a Fast Snap pair.
05858307005
WCheck the conditions for using Business Copy in
conjunction with Fast Snap.
The operation failed because the volume
was shared by a Fast Snap pair in
COPY (RS-R)/RCPY status.
05858407005
WVolumes that do not belong to CU group 0 are
currently not supported. Specify another volume.
The operation failed because the CU
group of the specified volume is not
supported.
05858507005
WSee the Business Copy User Guide for the relation
between the pair status of Continuous Access
The operation cannot be performed
because the specified primary volume is
05863007005
Journal and the Business Copy operations. Seeused by a delta resync pair of
Continuous Access Journal. the Fast Snap User Guide for the relation between
the pair status of Continuous Access Journal and
the Fast Snap operations.
WThe P-VOL of Continuous Access Journal pair for
Delta resync cannot be specified as S-VOL.
Specify another volume.
The operation failed because the
specified S-VOL was used by Delta
resync of Continuous Access Journal.
05863107005
WRefresh the Business Copy window, and check
the MU number that can be used.
The operation could not be performed
because the specified MU number is
already used.
05871107005
WVerify the pair configurations. See the Business
Copy User Guide for the relation between the
configuration and the operation of pairs.
The operation failed because the volume
specified as the P-VOL was used as the
S-VOL of another pair and the volume
05890607005
specified as the S-VOL was used as the
P-VOL of another pair already.
WSpecify other MU numbers."0" cannot be specified as the MU
number of L2 pair.
06802107005
WAssociate the Thin Provisioning volume with a
pool, and then retry the operation.
The command has been rejected,
because the specified P-VOL is a Thin
06873707005
Provisioning volume not associated with
a pool.
WAssociate the Thin Provisioning volume with a
pool, and then retry the operation.
The command has been rejected,
because the specified S-VOL is a Thin
06873807005
Part code 07005 217