HP XP7 Remote Web Console Messages (H6F56-96010)

Table 62 Error codes (part code 07005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
Provisioning volume not associated with
a pool.
WRetry the operation after quick formatting is
complete.
The command has been rejected,
because Quick Format is performed on
the specified P-VOL.
06874307005
WRetry the operation after quick formatting is
complete.
The command has been rejected,
because Quick Format is performed on
the specified S-VOL.
06874407005
EThe Command cannot be executed because the
Continuous Access Asynchronous pair is not in
The command has been rejected,
because the specified Continuous Access
06874907005
the state of PSUS. See the section about theAsynchronous pair was not in PSUS
status. interoperability with other products and functions
described in the Business Copy User Guide for
the relation between the state of Continuous
Access Asynchronous pair and the Business Copy
operations.
WQuick Restore cannot be performed in the current
pair configuration.
The Quick Restore command has been
rejected, because the specified pair is
06875007005
composed of the Thin Provisioning
volume and the volumes other than Thin
Provisioning volume.
WQuick Restore cannot be performed in the current
pair configuration. Select a pair whose device
The Quick Restore command has been
rejected, because device information
06875507005
information (Inquiry information) is the same, and
then perform Quick Restore.
(Inquiry information) of P-VOL and S-VOL
was different in the specified pair.
WWait for a while, and then retry the operation.Quick Restore cannot be performed
because the configuration is being
backed up in the target volume.
06876007005
WThe operation is not available because the target
volume has capacity changes. Verify the capacity
of the volume, and then apply the setting.
The command has been rejected,
because the specified P-VOL is a Thin
Provisioning volume whose capacity is
being added.
06880807005
WThe operation is not available because the target
volume has capacity changes. Verify the capacity
of the volume, and then apply the setting.
The command has been rejected,
because the specified S-VOL is a Thin
Provisioning volume whose capacity is
being added.
06880907005
WDelete the Continuous Access Synchronous,
Continuous Access Journal, or External Storage
The Initialize function cannot be
executed, because a Continuous Access
06881407005
Access Manager pair that is using ThinSynchronous pair or a Continuous
Provisioning volumes, and then retry the
operation.
Access Journal pair is created by using
Thin Provisioning volumes.
WRelease the pair of Snapshot that is using the
specified P-VOL, then retry the operation.
The command could not be executed
because the specified primary volume is
06883507005
used by a pair of Fast Snap that is
registered in the CTG.
WRelease the pair of Snapshot that is using the
specified S-VOL, then retry the operation.
The command has been rejected,
because the specified S-VOL is used by
06883607005
a pair of Snapshot, which is registered
in the CTG.
WWait until the zero page reclamation is
completed, and then retry the operation.
The command has been rejected,
because the specified P-VOL is a volume
06883707005
of Thin Provisioning whose zero page is
being reclaimed.
218 Message (part code group 07nnn)