HP XP7 Remote Web Console Messages (H6F56-96010)

Table 62 Error codes (part code 07005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
as S-VOL was not associated with a
pool.
WSet an LUN path to the specified primary volume,
and then retry the operation.
The command could not be executed
because no LUN path is set to the
volume specified as a primary volume.
07500507005
WSet an LUN path to the specified secondary
volume, and then retry the operation.
The command could not be executed
because no LUN path is set to the
volume specified as a secondary volume.
07500607005
WLog out, and then log back in with access to the
resource group containing the specified LDEV.
The specified LDEV belongs to a
resource group that you do not have
permission to access.
07501507005
WLog out, and then log back in with access to the
resource group containing the specified LDEV.
The LDEVs of a specified pool contain
an LDEV that belongs to a resource
07504607005
group that you do not have permission
to access.
WCheck the microcode version of the storage
system.
The operation failed because the current
microcode version does not support the
capacity of specified P-VOL.
07805307005
WCheck the microcode version of the storage
system.
The operation failed because the current
microcode version does not support the
capacity of specified S-VOL.
07805407005
WWait until the initialization of the pool is
completed, and then retry the operation.
The command was rejected, because
the pool associated with the Thin
07810807005
Provisioning volume that is specified as
the P-VOL was being initialized.
WWait until the initialization of the pool is
completed, and then retry the operation.
The command was rejected, because
the pool associated with the Thin
07810907005
Provisioning volume that is specified as
the S-VOL was being initialized.
WSpecify volumes other than those in the online
data migration process.
The operation cannot be performed
because the specified volume is in the
online data migration process.
07812807005
WSpecify volumes other than those in the online
data migration process.
The operation cannot be performed
because the volume specified as the
07812907005
primary volume is in the online data
migration process.
WSpecify a different volume.The operation cannot be performed
because the volume specified as the
07813007005
secondary volume is a migration volume
of Multi-Array Virtualization.
WVerify the status of the specified pool.The operation cannot be done because
a pool cannot be used.
07813907005
WWhen you create multiple Fast Snap pairs by
specifying two or more secondary volumes to one
The operation cannot be performed
because the specified pool number is
07814007005
primary volume, be sure to specify the same pool
number as the existing pairs.
not the same as the pool number for the
existing pairs.
WRelease the Fast Snap pair setting or specify
another volume.
The operation cannot be done because
the specified primary volume is a
secondary volume of Fast Snap.
07814107005
220 Message (part code group 07nnn)