HP XP7 Remote Web Console Messages (H6F56-96010)

Table 62 Error codes (part code 07005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WVerify the status of the volume.The operation failed because the volume
specified as the S-VOL is a leaf volume.
07825807005
WThe operation cannot be performed in the current
pair status of Continuous Access Journal. See
The operation failed because the
specified P-VOL that uses two mirrors in
07825907005
section "Interoperability with other products and3DC cascade, 3DC multi target, or Delta
functions" in the Fast Snap User Guide for theresync configuration is in one of the
following statuses. relation between the pair status of Continuous
Access Journal and the Fast Snap operations.
• The volume is in the Continuous
Access Journal Delta resync
configuration.
• The volume is a Continuous Access
Journal data volume.
WThe operation cannot be performed in the current
pair status of Continuous Access Journal. See
The operation failed because the
specified S-VOL that uses two mirrors in
07826007005
section "Interoperability with other products and3DC cascade, 3DC multi target, or Delta
functions" in the Fast Snap User Guide for theresync configuration is in one of the
following statuses. relation between the pair status of Continuous
Access Journal and the Fast Snap operations.
• The volume is in the Continuous
Access Journal Delta resync
configuration.
• The volume is a Continuous Access
Journal data volume.
WMake sure the MU number can be specified.The command ended abnormally
because the specified MU number is out
of the range that can be specified.
07826107005
WCheck the respective consistency group status or
create a Fast Snap pair without specifying the
CTG mode.
A Fast Snap pair with the CTG mode
specified cannot be created because all
the consistency groups have already
been defined.
07828907005
WSelect a different volume.A Fast Snap pair cannot be created
because the snapshot ID (MU number)
07829007005
that can be used for the volume specified
as the primary volume is depleted.
WCheck the defined snapshot groups or select a
different snapshot group.
A Fast Snap pair cannot be created
because all the snapshot groups have
07829107005
already been defined, or the number of
pairs that can be registered in the
specified snapshot group has exceeded
the maximum.
WWait until the initialization of the pool is complete,
and then retry the operation.
A Fast Snap pair in which a V-VOL of
Thin Provisioning is set as the primary
07829207005
volume cannot be created because the
Thin Provisioning pool is being
initialized.
WWait until the initialization of the pool is complete,
and then retry the operation.
Failed to create a Fast Snap pair
because the Thin Provisioning pool is
being initialized.
07829307005
WCheck the specified pair type.The Add Pair (Paircreate) operation
failed because the specified pair type
does not match the specified pool type.
07829407005
226 Message (part code group 07nnn)