HP XP7 Remote Web Console Messages (H6F56-96010)

Table 64 Error codes (part code 07105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WRelease the write-protection by Volume Retention.The specified volume cannot be used
because it is write-protected by Volume
Retention.
00562607105
WWait for a while, and then retry the operation.Processing in progress.00650207105
WWait for a while, and then retry the operation.The volume status is being changed to
simplex.
00650307105
WPerform either of the following operations:The command has been rejected,
because the specified volume was
00652007105
• Change the attribute of the security group so
that the secondary volume can be specified.
registered in the Security Group that
cannot specify T-VOL(Secondary
Volume).
• Remove the specified volume from the security
group.
WVerify the error factor in another setting and then
retry the operation.
The setting could not be applied because
there is an error in a different setting.
00653707105
EIf this problem persists, contact HP Technical
Support.
This error code is not registered.00731007105
WAdd shared memory or confirm whether the
necessary program product key is installed.
Sufficient amount of shared memory is
not installed or the program product is
not installed.
00850007105
WWait for a while, and then retry the operation.The command has been rejected,
because the command specified last time
is being processed.
00850107105
WDelete the Remote Copy pair.You cannot create the new pair, because
a remote copy pair exists in the same
storage system frame.
00850307105
WVerify the pair configuration, the pair status, and
the pair volume status, or that the source volume
The command could not be executed.00850407105
of Concurrent Copy or Compatible XRC is not
specified. (See the Business Copy for Mainframe
Systems User Guide for the relation between the
pair configuration, the pair status, the pair volume
status, or the source volume of Concurrent Copy
or Compatible XRC and those operations.)
ESee the section "Status, permitted pair operations"
in the Business Copy for Mainframe Systems User
The command has been rejected,
because the operation cannot be
accepted in the current pair status.
00850507105
Guide for the relation between the status of pairs
and the commands that can be accepted.
WVary the secondary volume offline from the
mainframe host, and then retry the operation.
The command cannot be run because
the specified secondary volume is used
by the host.
00850607105
WThe pair split operation cannot be performed
because the pair is already in the split status.
The Split Pair(s) command was issued to
the pairs in the Split/SUSPOP status.
00850707105
WThe Add Pair operation cannot be performed on
pairs in the split status.
The Add Pair(Create Pairs) command
was issued to the pairs in the
Split/SUSPOP status.
00850807105
WVerify the settings, and then retry the operation.The Split Pairs command with the
QUIESCE specification was issued to a
secondary boot device.
00850907105
WVerify the settings, and then retry the operation.The S-VOL(Primary Volume) Suspend
command was issued to a secondary
boot device.
00851007105
228 Message (part code group 07nnn)