HP XP7 Remote Web Console Messages (H6F56-96010)

Table 68 Error codes (part code 08505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf the problem persists despite retrying, please
contact HP Technical Support.
An attempt has been made to either
register newly a SLPR that is already
05502308505
registered, or delete a SLPR that is not
registered.
WSelect a different parity group, and then retry the
operation. If this problem persists, contact HP
Technical Support.
The configuration of the CLPR is already
changed, or some parity groups or some
virtual volumes are registered in a
different CLPR.
05502408505
WCorrect the parity group settings, and then retry
the operation. If this problem persists, contact HP
Technical Support.
The configuration of the CLPR is already
changed, or the settings of the parity
group or the virtual volume are not valid.
05502508505
WCorrect the port name (port number), and then
retry the operation. If this problem persists, contact
HP Technical Support.
The specified port name (port number)
is invalid.
05502608505
ECorrect the cache size setting, and then retry the
operation. If this problem persists, contact HP
Technical Support.
The configuration of the CLPR is already
changed, or the cache size is not valid.
05502708505
WCorrect the cache size to be equal to or greater
than the minimum required value, and then retry
The configuration of the CLPR is already
changed, or the specified cache size
05502808505
the operation. If this problem persists, contact HP
Technical Support.
excluding the cache residency size is
less than the minimum. CLPR No:xxx
WCorrect the cache size, and then retry the
operation. If this problem persists, contact HP
Technical Support.
The configuration of the CLPR is already
changed, or the total cache size is not
valid.
05502908505
EIf the problem persists despite retrying, please
contact HP Technical Support.
The same port is already registered in a
different SLPR.
05503308505
WInstall the program product.This function is not available. Open
System Array Management is required
to create CLPR.
05522808505
iContact the storage administrator. (To the storage
administrator: Reconfigure the logon information.
The logon information of the partition
management function has been
05650108505
If this problem persists, contact HP Technical
Support.)
initialized because the conflicting
information is detected.
EReduce the number of users currently logged on,
and then retry the setting, or specify a value larger
than the number of users currently logged on.
The operation to set the maximum
number of connections has been
cancelled because an attempt has been
05650208505
made to specify this value to less than
the number of users who are currently
connected. Check the maximum
permissible number of connections.
EIf the problem persists despite retrying, please
contact HP Technical Support.
This function cannot be used by the
storage partition administrator.
05652408505
EIf the problem persists despite retrying, please
contact HP Technical Support.
While another user is logged into
Remote Web Console, you cannot edit
05652708505
the information of the SLPR that the user
owns. SLPR No:xxx
WCorrect the licensed capacity on the License Key
Partition Definition panel.
The licensed capacity exceeds the
maximum because of the configuration
change.
05653608505
EIf this problem persists, contact HP Technical
Support.
An unknown error was detected.05700208505
246 Message (part code group 08nnn)