HP XP7 Remote Web Console Messages (H6F56-96010)

Table 82 Error codes (part code 09605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WIf the pair is Continuous Access Synchronous,
change the status to PSUS, and then retry the
The specified volume is a Continuous
Access Synchronous secondary volume
00813509605
operation. If the pair is Business Copy, changein COPY or PAIR status or a Business
the status to PSUS or PSUS (SP), and then retry
the operation.
Copy secondary volume in COPY, PAIR,
COPY (SP), COPY (RS), or COPY (RS-R)
status.
WThe currently licensed capacity is insufficient. To
increase the licensed capacity, buy a new license
key.
The command was rejected, because
the licensed capacity was exceeded.
00813609605
ETo release the Reserved setting, please contact
HP Technical Support.
The Reserved setting of the specified
volume cannot be released.
00813809605
WWait until the status of the pair changes to PAIR,
and then retry the operation.
The attribute of the Business Copy
primary volume cannot be changed
because the pair status is COPY (RS-R).
00813909605
WVerify the logical volume, and then retry the
operation.
You cannot select this logical volume
because it is used as a Continuous
Access Journal volume.
00814209605
WVerify the logical volume, and then retry the
operation.
You tried to set a retention term to a
logical volume whose access attribute is
not Read Only or Protect.
00815009605
WTo change the attribute, please contact HP
Technical Support.
The retention term of the logical volume
cannot be shortened.
00815109605
WSpecify an open-systems volume.You cannot set a retention term to any
mainframe volumes.
00815209605
WCorrect the retention term, then retry the
operation.
The specified retention term exceeds the
maximum.
00815309605
WCheck the retention term of the logical volume,
then retry the operation.
The retention term of the logical volume
has been changed by RAID Manager.
00815409605
WTo change the access attribute of the logical
volume to Read/Write, please contact HP
Technical Support.
You cannot change the access attribute
because a retention term is set to the
specified logical volume.
00815509605
WSet the expiration lock to Disable, then change
the access attribute.
You cannot change the access attribute
because the expiration lock is set to
Enable.
00815609605
WRetry the operation after the process is completed.The specified operation cannot be
executed because the LDEV shredding
or the LDEV format is being executed.
05840409605
WSelect another logical volume.The attribute of the pool volume cannot
be changed.
05841209605
WChange the status of the Fast Snap pair to PAIR
or PSUS.
The attribute of the Fast Snap secondary
volume or the virtual volume cannot be
05841309605
changed because the pair status is not
PAIR or PSUS.
WWait until the status of the pair changes to PAIR,
and then retry the operation.
The attribute of the Fast Snap primary
volume cannot be changed because the
pair status is RCPY.
05841409605
WRelease or suspend the Universal Replicator
volume.
The access attribute cannot be changed,
because the status of the specified
05841809605
Continuous Access Journal volume is in
PAIR or in COPY.
Part code 09605 259