HP XP7 Remote Web Console Messages (H6F56-96010)

Table 24 Error codes (part code 00605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting of ExG.There are no setting lines of the ExG.06580100605
WCheck the contents of the spreadsheet.There are no setting lines of
TargetPathGroup.
06580200605
WDelete unnecessary external LU(s), then retry the
operation.
The number of external LUs that can be
connected from a single port has
exceeded the maximum value.
06601100605
WOperate within the ports of the connected external
storage system.
The number of registered ports of the
external storage system has exceeded
the maximum.
06601200605
WChange the emulation type to be set in the
volume.
The specified emulation type cannot be
set because 3390-3R is set in the storage
system.
06601300605
WChange the emulation type to be set in the
volume.
The specified emulation type cannot be
set because 3390-3 is set in the storage
system.
06601400605
WCheck the number of LDEVs.The number of LDEVs that can be
defined in an external volume has
exceeded the maximum value.
06650100605
WCheck the setting of ExG.Specified ExG has already been used.06650200605
WVerify the settings of the specified LDKC, CU, and
LDEV.
The LDKC, CU, and LDEV are not set
within the available range.
06650300605
WCheck the setting of LDKC, CU, and LDEV.Specified LDKC:CU:LDEV has already
been used.
06650400605
WCheck the setting of emulation groups within the
range grouped by 32LDEV numbers.
The specified LDEV number has already
been assigned to another emulation
06650500605
group within the range grouped by 32
LDEV numbers.
WCheck the setting of SSID.Specified SSID has already been used.06650600605
WCheck the status and the capacity of target
external volume.
The target external volume is blocked or
not set within the range of capacity that
can be used.
06650700605
WCheck the setting of LDEV capacity.The specified LDEV capacity is invalid.06650800605
WCheck the setting of LDEV capacity.The total LDEV capacity defined in the
external volume exceeds the external
volume size.
06650900605
WCheck the setting of the specified emulation type.The specified emulation type cannot be
used.
06651000605
WCheck the setting of CLPR.Specified CLPR is not mounted.06651200605
WCheck the configuration and the setting of external
volume.
The target external volume has already
been mapped or set for mapping.
06651700605
WCheck the setting of path configuration.The External Path configuration of the
target external volume is not
06651800605
corresponding to that of another external
volume in the same External Path Group.
WCheck the mounted packages.Mainframe volume and intermediate
volume cannot be set because the
06652000605
package for mainframe system is not
mounted.
50 Message (part code group 00nnn)