HP XP7 Remote Web Console Messages (H6F56-96010)

3 Message (part code group 01nnn)
This chapter includes the error messages with the part code 01005 to 01310.
Part code 01005
Table 31 Error codes (part code 01005)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WPlease select another volume.The specified volume cannot be set as
a command device because it is used
00100201005
as the volume of Continuous Access
Synchronous, Continuous Access
Journal, Business Copy, Auto LUN, or
Fast Snap.
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
Error happened before the change was
processed. You are trying to set multiple
paths to the same volume from one
group.
00100301005
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
Error happened before the change was
processed. Multiple volumes are
specified to a single port, group or LUN
combination.
00100401005
WSpecify a different volume, and then retry the
operation.
The following volumes cannot be
specified to change the path
configuration:
00100501005
• A volume that does not exist.
• A volume that is used by Auto LUN.
WCheck the settings.The last path for the volumes used for
Continuous Access Synchronous,
00100701005
Continuous Access Journal, Continuous
Access Journal Z, Business Copy,
Business Copy Z, Auto LUN, or Fast
Snap cannot be removed.
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
Error happened before the change was
processed. The emulation type of the
volumes is not for open systems, or the
volumes are not mounted.
00100901005
EIf this problem persists, please contact HP
Technical Support.
Error happened before the change was
processed.
00101001005
An error occurred during SVP
processing.
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
Error happened before the change was
processed. The specified port does not
exist. Or the specified port type is not
Fibre port.
00101801005
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
Error happened before the change was
processed. Invalid LUN.
00102001005
WThe configuration information has been already
changed. Check the settings, and request the
setting of the configuration information again.
Error happened before the change was
processed. The specified volume does
not exist.
00102101005
Part code 01005 61