HP XP7 Remote Web Console Messages (H6F56-96010)

Table 36 Error codes (part code 03005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WDelete the following pairs or volumes if any, and
then retry the operation.
Failed to delete the pool. Pools cannot
be deleted when they are in the
following status:
07806203005
• Fast Snap pairs
• Pairs of Fast Snap are remaining.
• Thin Provisioning volumes
• Volumes of Thin Provisioning are
remaining.
WWait until the formatting is complete, and then
retry the operation.
The pool cannot be deleted because
pools are not deleted when any pool
07806303005
volume of the specified pool is being
formatted.
WSpecify a pool volume, or, specify a pool volume
that is set to the specified pool, then retry the
operation.
Failed to delete the pool volume because
the specified pool volume had one of
the following problems.
07806403005
• It is not a pool volume.
• The pool volume is not set to the
specified pool.
WCheck the LDEV ID of the pool volume, then retry
the operation.
The LDEV ID of the specified pool volume
is invalid.
07806503005
WRestore the blocked pool VOLs.The maintenance operation cannot be
performed on the specified THP V-VOLs
07806703005
because the THP V-VOLs include blocked
pool volumes.
EContact HP Technical Support.The microcode does not support the
specified operation.
07807503005
WSet the specified LDEV to OFFLINE.The operation cannot be done because
the specified V-VOL is online from an
EAV unsupported OS.
07807603005
WRelease the Compatible XRC setting, and then
retry the operation.
The operation cannot be done because
the specified V-VOL is used for
Compatible XRC.
07807703005
WRelease the Compatible FlashCopy or Compatible
FlashCopy SE setting, and then retry the
operation.
The operation cannot be done because
the specified V-VOL is used in
Compatible FlashCopy, or Compatible
FlashCopy SE.
07807803005
WVerify the pool VOLs to be set in the specified
pool.
An internal volume and an external
volume cannot be set as pool VOLs in
the specified pool.
07810703005
WVerify the cache mode of the subject external
volumes.
External volumes with mixed cache
mode setting, enabled and disabled,
07811103005
cannot be used as pool volumes in a
THP pool.
WVerify the cache mode of the subject external
volumes.
External volumes with cache mode
disabled cannot be specified as pool
volumes for the pool.
07811203005
EPerform all of the following tasks, and then retry
the operation.
The pools cannot be initialized due to
one of the following reasons:
07811303005
• Release all settings of THP V-VOL in the
different program product.
• The THP V-VOL is used by a different
program product.
• •There is a Fast Snap pair on the
storage system.
Release all Fast Snap pairs.
94 Message (part code group 03nnn)