HP XP P9000 Audit Log User and Reference Guide

Detailed information
DescriptionItem
The name of the port where the LUN security setting is changed.Port
Indicates whether the LUN security setting is enabled or disabled.Switch
Disable or Enable will appear.
The number of ports where the LUN security setting is changed.Num. of Ports
[Install] Set Subsystem Time
Example 1: the case of TOD change
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Subsystem Time,TOD Change,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Time=YYYY/MM/DD HH:mm:SS
Example 2: the case of Synchro. Infor.
For IPv4
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Subsystem Time,Synchro. Infor.,Normal end,
from=xxx:xxx:xxx:xxx,,Seq.=xxxxxxxxxx
+{Use Synchro.,SNTP IP,SNTP Port,Time Zone,Check Time,
Create SIM}
={Valid,(123.456.789.123),100,Tokyo Standard Time,23,ON}
For IPv6
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Subsystem Time,Synchro. Infor.,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Use Synchro.,SNTP IP,SNTP Port,Time Zone,Check Time,
Create SIM}
={Valid,(1111:2222:3333:4444:5555:6666:7777:8888),100,
Tokyo Standard Time,23,ON}
Basic information
DescriptionParameter
The date and the time.TOD Change
The setting of time correction function.Synchro. Infor.
Detailed information
DescriptionItem
Indicates the date and the time in the format of “YYYY/MM/DD HH:mm:SS”.(YYYY: year,
MM: month, DD: date, HH: hour, mm: minute, SS: second).
Time
Indicates whether the time correction function is valid or invalid.Use Synchro.
Valid: Enable, Invalid: Disable
The IP address (IPv4 or IPv6) of SNTP server.SNTP IP
The port used by SNTP server.SNTP Port
The time zone.Time Zone
100 Audit log examples